Bizkets is Drunk? Too heavy needs boost Member 5,929 Member For: 11y 4m 29d Gender: Male Location: Adelaide Posted 09/06/16 11:53 AM Author Share Posted 09/06/16 11:53 AM Turbosmart 12lb one. Link to comment Share on other sites More sharing options...
Bizkets is Drunk? Too heavy needs boost Member 5,929 Member For: 11y 4m 29d Gender: Male Location: Adelaide Posted 09/06/16 11:02 PM Author Share Posted 09/06/16 11:02 PM Short vid not sure if its going to help but it's just not going crazy like it used to. Link to comment Share on other sites More sharing options...
Bizkets is Drunk? Too heavy needs boost Member 5,929 Member For: 11y 4m 29d Gender: Male Location: Adelaide Posted 10/06/16 07:20 AM Author Share Posted 10/06/16 07:20 AM So I did a live log with the torque app. Only saw a peak boost of 15lb at 4600rpm then drop off fast. So im thinking with the extra noise in the zorst and only 15lb that means waste gate pressure is leaking yeah? Should be 20Lb at 2500-2600rpm Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,094 Member For: 16y 8m 25d Gender: Male Location: Melbourne Posted 10/06/16 07:23 AM Share Posted 10/06/16 07:23 AM Either the actuator/solenoid system is farked or there's a boost leak. Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 7m 3d Gender: Male Location: Adelaide Posted 10/06/16 07:29 AM Share Posted 10/06/16 07:29 AM A new turbo and actuator re fit should be checked on the dyno A true story, wouldn't go as far as FACT!!! Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 11d Gender: Male Location: Perth Posted 10/06/16 07:29 AM Share Posted 10/06/16 07:29 AM Yes. T 8 minutes ago, Bizkets is Drunk? said: So I did a live log with the torque app. Only saw a peak boost of 15lb at 4600rpm then drop off fast. So im thinking with the extra noise in the zorst and only 15lb that means waste gate pressure is leaking yeah? Should be 20Lb at 2500-2600rpm YEs, TS are very specific about actuator preload with their actuators. So I'd start there. Link to comment Share on other sites More sharing options...
Bizkets is Drunk? Too heavy needs boost Member 5,929 Member For: 11y 4m 29d Gender: Male Location: Adelaide Posted 10/06/16 08:41 AM Author Share Posted 10/06/16 08:41 AM I did a half hole preload like turbosmart suggest. f*cking pissed off just want my car back to normal. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 11d Gender: Male Location: Perth Posted 10/06/16 08:42 AM Share Posted 10/06/16 08:42 AM They don't spec half a hole.... Are you housings aligned bang on as per the old turbo? That will also affect preload. Link to comment Share on other sites More sharing options...
Bizkets is Drunk? Too heavy needs boost Member 5,929 Member For: 11y 4m 29d Gender: Male Location: Adelaide Posted 10/06/16 09:01 AM Author Share Posted 10/06/16 09:01 AM Slightly different. Front cover is upright as before I used the gt bracket not modded it was leaning. So front cover twist will affect it even with the same amount of preload as last time. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 11d Gender: Male Location: Perth Posted 10/06/16 09:43 AM Share Posted 10/06/16 09:43 AM Yup. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now