discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 1m Gender: Male Location: Probably above atmospheric pressure Posted 24/05/16 01:35 PM Share Posted 24/05/16 01:35 PM It was in the sand 100%. Unearthed it with hose while washing my car Link to comment Share on other sites More sharing options...
Lennox Member 2,586 Member For: 11y 9m 29d Gender: Male Location: Perth Posted 24/05/16 01:43 PM Share Posted 24/05/16 01:43 PM Is the friction coefficient worth comparing brake pads on? Cos the ns400 look quite sh*t from that perspective. The higher end hc800 appear to perform better even cold and significantly better when hot? Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 1m Gender: Male Location: Probably above atmospheric pressure Posted 24/05/16 05:32 PM Share Posted 24/05/16 05:32 PM Now I'm curious! Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 2d Gender: Male Location: Perth Posted 25/05/16 12:20 AM Share Posted 25/05/16 12:20 AM HC800 is approaching track pads specs, so not really surprissing it performs better at higher temps. But look at the web diagram you're trade off would be extra dust and noise. I thought double R Ron was running them in his F6, but they again he does't drive his F6 much so probably couldn't give daily use feed back, Possible Kyle is running them as well? I reckon the HC800's would love to snack on a rotor or two. Link to comment Share on other sites More sharing options...
Lennox Member 2,586 Member For: 11y 9m 29d Gender: Male Location: Perth Posted 25/05/16 02:51 AM Share Posted 25/05/16 02:51 AM I'm assuming the 2 friction numbers are minimum and maximum is that correct? So they even perform better at lower temps which was a surprise for me. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 2d Gender: Male Location: Perth Posted 25/05/16 03:01 AM Share Posted 25/05/16 03:01 AM I'm not actually sure the temp is supposed to correlate to the minimum Friction CI. If it is then yes they would appear to preform better, if not then potentially the NS400's would perform better from cold. Would need to ring and ask them to clarify. 2 Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 1m Gender: Male Location: Probably above atmospheric pressure Posted 25/05/16 05:22 AM Share Posted 25/05/16 05:22 AM ^ Do that Tim and report back Link to comment Share on other sites More sharing options...
Lennox Member 2,586 Member For: 11y 9m 29d Gender: Male Location: Perth Posted 25/05/16 12:00 PM Share Posted 25/05/16 12:00 PM At work atm no time in days to make phone calls...but I'll send em an email and see if they answer. Quick googling reveals a letter marking system where the first letter is cold friction second letter is hot friction but strayans seem to rate pads with a numbering system so can't be certain. 1 Link to comment Share on other sites More sharing options...
Lennox Member 2,586 Member For: 11y 9m 29d Gender: Male Location: Perth Posted 27/05/16 11:48 AM Share Posted 27/05/16 11:48 AM As I anticipated they would give me no info about the pad rating numbers other than "the numbers are friction average at certain temps", and wouldn't tell me any more when I asked what temps they are and if they are a standard temp across the board... So that sheds little light for us. Sorry guys Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,056 Member For: 16y 8m 15d Gender: Male Location: Melbourne Posted 27/05/16 12:36 PM Share Posted 27/05/16 12:36 PM Don't these spanners want to sell their products? Surely you'd know about them enough to give out this information... Maybe I'm just more overly giving with my knowledge... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now