JK 47 Gold Donating Members 161 Member For: 17y 1m 30d Gender: Male Location: sydney Posted 23/02/16 03:42 PM Share Posted 23/02/16 03:42 PM Has anyone used the venom 4"dump,asking about the fitment ,doe's it fit without hitting anything ,and doe's it fit nice and high,as in ground clearance, thanks for any imfo Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 28d Gender: Male Location: Adelaide Posted 23/02/16 10:08 PM Share Posted 23/02/16 10:08 PM Yeh mate venom do both a dump/cat section that's bolt in and just a cat section that's bolt in and both are really good products regarding fitting/performance/looks and clearance if anyone wants one a can help out with better than rrp Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,916 Member For: 9y 9m 30d Gender: Male Location: South Australia Posted 23/02/16 10:34 PM Share Posted 23/02/16 10:34 PM I recently bought one for my bf and it hits on the steering heat shield. Welds and pipe lengths leave a lot to be desired internally where the 2 pipes join to the 3.5 inch pipe. Apart from no clearance with the heat shield it fitted up without any hassle. Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 28d Gender: Male Location: Adelaide Posted 23/02/16 11:25 PM Share Posted 23/02/16 11:25 PM Sorry I must state my experience is only with FG series 1 Link to comment Share on other sites More sharing options...
masda74 To Loud Gold Donating Members 4,112 Member For: 12y 11m 29d Gender: Male Location: WA, Perth Posted 23/02/16 11:28 PM Share Posted 23/02/16 11:28 PM The BF and FG have different cats, They tend to go meow in a different way. In regards to the dump pipes, would they be the same part? 1 Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,916 Member For: 9y 9m 30d Gender: Male Location: South Australia Posted 24/02/16 12:19 AM Share Posted 24/02/16 12:19 AM 35 minutes ago, masda74 said: The BF and FG have different cats, They tend to go meow in a different way. In regards to the dump pipes, would they be the same part? I'm pretty sure all three parts are different between the bf and fg, though I could be remembering wrong. I called Venom before xmas and the bloke I spoke to was more than happy to discuss everything with me. I only pointed out the negatives earlier (before my morning coffee) and I forgot to add that ground clearance is as good as it possibly can be and I haven't had any issues whatsoever with height. I had no trouble aligning bolt holes and getting everything tight. The heat shield interference can be easily fixed with a blowtorch and ball-pein hammer with no ill effects to performance. It makes a nice whistling sound too if that's your thing. Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 6m 3d Gender: Male Location: NOR Perth Posted 24/02/16 01:17 AM Share Posted 24/02/16 01:17 AM (edited) 1 hour ago, masda74 said: In regards to the dump pipes, would they be the same part? Hey Marco....I was trolling their ebay page last night....theres a full 4" dump tapering to 3.5" and apparently matching up to the stock catback (and others). Its $895 RRP.... I dunno how long its been on the market for (and if I was reading right he also does a twin 2.5" catback system for the FG too - but that wasn't a listing on ebay so possibly early days?). I'm kinda tempted to sell my cat only pipe; but I don't think there will be much difference at the low 300 end on 98. Plus maybe I'd have to do the wastegate port + flapper mod and you know how I am with my budget lol Edit: just read your post completely wrong....thought you were asking if there was a venom dump pipe available on its own Edited 24/02/16 01:18 AM by PTR_NITRO_FG cause I cant read properly Link to comment Share on other sites More sharing options...
camo86T Silver Donating Members 1,810 Member For: 10y 9m 16d Gender: Male Location: SW Sydney Posted 24/02/16 02:26 AM Share Posted 24/02/16 02:26 AM 2 hours ago, masda74 said: In regards to the dump pipes, would they be the same part? No, dump pipes aren't the same between B & F series...BA-BF turbo location is higher than FG because different exhaust manifold Longitudinal positioning is also different iirc Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,916 Member For: 9y 9m 30d Gender: Male Location: South Australia Posted 24/02/16 03:04 AM Share Posted 24/02/16 03:04 AM 1 hour ago, PTR_NITRO_FG said: Plus maybe I'd have to do the wastegate port + flapper mod and you know how I am with my budget lol I didn't port my wastegate and (obviously) has the standard flapper. I can run 12 psi straight off the gate with the venom dump, cat and twin 2.5 pipes with the rest of the system stock. Maybe you wont need to? Also old mate said that he hasn't got around to updating their online stuff yet but it is available iirc. 1 Link to comment Share on other sites More sharing options...
masda74 To Loud Gold Donating Members 4,112 Member For: 12y 11m 29d Gender: Male Location: WA, Perth Posted 24/02/16 05:28 AM Share Posted 24/02/16 05:28 AM I thought as much about the dump pipes. I knew that the cat's were different cause during our group buy, I had to make sure we had the right model. In regards to dump pipe, I think I will be changing out the cat and get the whole assembly put in. still not sure where I will be heading. I got to sit down with Rob and have a good discussion. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now