Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 4m 20d Gender: Male Location: Perth Posted 23/12/15 11:45 AM Share Posted 23/12/15 11:45 AM Pats relearn will fix the security issues. Then the car will need to be tuned correctly. Link to comment Share on other sites More sharing options...
Hussydabomb Member 81 Member For: 10y 1m 20d Posted 23/12/15 11:48 AM Author Share Posted 23/12/15 11:48 AM Pats relearn will fix the security issues. Then the car will need to be tuned correctly.I wont get the mechanic to change over the loom then, thanks a lot for everyone's patients. ill keep you boys posted 1 Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 3m 16d Gender: Male Location: Perth Posted 23/12/15 01:06 PM Share Posted 23/12/15 01:06 PM (edited) yes it has a manual PCM out of a Ba 6 speed turbo installed right now fresh from a wreckers (2nd one ive tried), when we installed it and started it up it runs very very rough so much so that I did not even want to drive it to see if it goes over 45km/h fearful it will damage the engineIf the smart lock indicator is he hand signal that flashes every 10 seconds or so then yesused Xcal Sct 4 to flash my custom tune (done when the car was automatic) car it idles fine and drives fine but but will not go over 45km/hYada yada yada Edited 23/12/15 01:15 PM by arronm Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 4m 20d Gender: Male Location: Perth Posted 23/12/15 01:08 PM Share Posted 23/12/15 01:08 PM Ba2 04 on where factory 6spd man double r Ron. Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 3m 16d Gender: Male Location: Perth Posted 23/12/15 01:14 PM Share Posted 23/12/15 01:14 PM You are correct. I was thinking N/A not turbo Link to comment Share on other sites More sharing options...
Hussydabomb Member 81 Member For: 10y 1m 20d Posted 24/12/15 12:28 PM Author Share Posted 24/12/15 12:28 PM Mate, just get the current pcm set up properly. I did the same conversion back in 05 no need to remove the auto loomWell places are closed for around a week or so now dew to the holidays.Is there anything other than bridging the neutral switch, reverse lights and speedo that needed to be modified on the loom to fit the 6 speed?do the shift solenoids, torque converter and all the other stuff from the auto trans loom need to be hooked up to their respective power return to the ECU? right now they just end at the pin out and they come up on diagnostics as being earthed and not getting signals etc Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 4m 20d Gender: Male Location: Perth Posted 24/12/15 12:51 PM Share Posted 24/12/15 12:51 PM Nope. Your seeing those codes due to the auto tune being installed in the PCM. Jump on the hpt forum and put the call out. You might find somebody who'll come and edit the tune to suit the manual box. If you where in Perth I'd happily do it for you but it's a bit of a drive at 45kmh Link to comment Share on other sites More sharing options...
Hussydabomb Member 81 Member For: 10y 1m 20d Posted 24/12/15 01:08 PM Author Share Posted 24/12/15 01:08 PM Nope. Your seeing those codes due to the auto tune being installed in the PCM.Jump on the hpt forum and put the call out. You might find somebody who'll come and edit the tune to suit the manual box.If you where in Perth I'd happily do it for you but it's a bit of a drive at 45kmhhaha ill start driving now ill arrive around Feb?Ok no worries ill jump on the forums tomorrow and see if we get anywhere with it there if nothing changed ill get that custom tune done when the shops open up down here thanks again Link to comment Share on other sites More sharing options...
Hussydabomb Member 81 Member For: 10y 1m 20d Posted 28/12/15 10:58 AM Author Share Posted 28/12/15 10:58 AM OK guys the battle is over! all sorted! done and dusted!Problem was me flashing the auto custom tune and overwriting the manual ECU's programmingand when we flashed it back to stock it was idling rough dew to the big injectors not going so low on the stock tune and causing it to run very rich.currently running a stock manual tune with the injectors tweaked a little bit till the shops open up after the holidays and throwing in a new custom tune!BIG BIG thanks to everyone for being patient and reaching out! much loveIF ANYBODY HAS ANY QUESTIONS ON WHAT IS NEEDED, INSTALLATION, OR ANYTHING I AM HAPPY TO HELP JUST INBOX ME 2 Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 8m 12d Gender: Male Location: Adelaide Posted 28/12/15 11:01 AM Share Posted 28/12/15 11:01 AM Good to hear mate 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now