Hussydabomb Member 81 Member For: 10y 1m 20d Posted 23/12/15 10:38 AM Author Share Posted 23/12/15 10:38 AM Just Another thought, whenever we flash the car to stock using the xcal 4 it runs rough as guts, black smoke out of the exhaust and idle of way off. Since the custom tune is idling 100% fine and working normal good until 45km/h I wouldn't think it is the tune. But like I said just a thought, since the tune was done when the car was an AUTOMATIC would that have an effect on it since I've been flashing it to a manual car?Basically I'm asking when they done the custom tune do they put in an drive line option as automatic? Or is it just fuel ratios, boost etc that are on the custom tune that will not effect anything Sent from my SM-G900I using Tapatalk Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 4m 19d Gender: Male Location: Perth Posted 23/12/15 10:43 AM Share Posted 23/12/15 10:43 AM Mate, just get the current pcm set up properly. I did the same conversion back in 05 no need to remove the auto loom 2 Link to comment Share on other sites More sharing options...
Tocchi Sandtrap Motorsport Donating Members 2,055 Member For: 16y 2m 18d Gender: Male Location: Perth Posted 23/12/15 10:47 AM Share Posted 23/12/15 10:47 AM Mate, just get the current pcm set up properly. I did the same conversion back in 05 no need to remove the auto loomGenerally:Listen to this guy = having a running carNot listening to this guys advice = a car that remains broken 2 Link to comment Share on other sites More sharing options...
Hussydabomb Member 81 Member For: 10y 1m 20d Posted 23/12/15 10:59 AM Author Share Posted 23/12/15 10:59 AM I've had 3 different places program the ECU pcm and bcm and all 3 have had the same thing happen multiple times. What am I or they missing?? Sent from my SM-G900I using Tapatalk Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 4m 19d Gender: Male Location: Perth Posted 23/12/15 11:16 AM Share Posted 23/12/15 11:16 AM I can't tell you from my lounge room in Perth. Are they flashing manual tunes in or correctly setting up the ecu correctly? Shit time of to attempt it but if you're able to airbag the ecu to me I can set it up correctly.You should jump on the hp tuners forum and see if any local members to you can help you out. Link to comment Share on other sites More sharing options...
Hussydabomb Member 81 Member For: 10y 1m 20d Posted 23/12/15 11:20 AM Author Share Posted 23/12/15 11:20 AM It is a manual ECU out of a 6 speed turbo BA, they are hard to come by. I'll jump on hp tuners and make an account I guess but man getting desperate if you're happy to have a look at it I'd send it over the holidays some time...Sent from my SM-G900I using Tapatalk Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 4m 19d Gender: Male Location: Perth Posted 23/12/15 11:24 AM Share Posted 23/12/15 11:24 AM So you've fitted a manual PCM, are you still getting the "code" error on the icc and smart lock indicator? What tune is in the PCM? Did you install the manual pcm then flash your old tune back in? Link to comment Share on other sites More sharing options...
Hussydabomb Member 81 Member For: 10y 1m 20d Posted 23/12/15 11:31 AM Author Share Posted 23/12/15 11:31 AM (edited) yes it has a manual PCM out of a Ba 6 speed turbo installed right now fresh from a wreckers (2nd one ive tried), when we installed it and started it up it runs very very rough so much so that I did not even want to drive it to see if it goes over 45km/h fearful it will damage the engineIf the smart lock indicator is he hand signal that flashes every 10 seconds or so then yesused Xcal Sct 4 to flash my custom tune (done when the car was automatic) car it idles fine and drives fine but but will not go over 45km/h Edited 23/12/15 11:32 AM by Hussydabomb Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 4m 19d Gender: Male Location: Perth Posted 23/12/15 11:36 AM Share Posted 23/12/15 11:36 AM Dude, your flashing an auto tune into a manual PCM. Back to basics. Get ford to do a PATS relearn. (forscan is apparently able to do this but I haven't trued) The get an appropriate custom tune to suit the mods and the manual pcm. Or reinstall the original auto pcm and get it setup properly to suit the manual box. Pats (passive anti theft system) had the ability to reduce fuel and timing to limit the carz speed of it thinks it's been stolen, I can't say this is the case but it sounds like it. Link to comment Share on other sites More sharing options...
Hussydabomb Member 81 Member For: 10y 1m 20d Posted 23/12/15 11:44 AM Author Share Posted 23/12/15 11:44 AM Ok tomorrow ill go to ford and tell them to do a PATS relearn and if that does not fix the problem, then go to horsepower factory who done the original auto custom tune and tell them to do another custom tune on the manual Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now