Lennox Member 2,586 Member For: 11y 11m 1d Gender: Male Location: Perth Posted 20/12/15 08:57 AM Share Posted 20/12/15 08:57 AM Can't help sorry but what's this cost you all up? Feel like manual.. 1 Link to comment Share on other sites More sharing options...
Hussydabomb Member 81 Member For: 10y 1m 4d Posted 21/12/15 02:57 AM Author Share Posted 21/12/15 02:57 AM Hey guys I connected the red/blue wire and light green wires now it starts up no worries but it still will not go over 2.5k RPM any ideas? Link to comment Share on other sites More sharing options...
Hussydabomb Member 81 Member For: 10y 1m 4d Posted 21/12/15 03:23 AM Author Share Posted 21/12/15 03:23 AM I'd assume it need sto be hooked upto the pcm too not just bypass the remobiliser? I think that's all the guy dine when he came out with the computer Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 4m 4d Gender: Male Location: Perth Posted 21/12/15 05:51 AM Share Posted 21/12/15 05:51 AM Does it start with the key now? Link to comment Share on other sites More sharing options...
Hussydabomb Member 81 Member For: 10y 1m 4d Posted 21/12/15 06:30 AM Author Share Posted 21/12/15 06:30 AM Yes it does start with the key now after I bridged the red/blue wire and light green wires together, I ended up doing it under the car to make it a little neater.Also just noticed that the immobiliser signal on the dash flashed every 10 seconds or so... Lennox, hey bud I has cost me 6 speed box, tail shaft, interior inserts, ECU, fluid reservoir and hoses 1kLabour 2.2kManual loom 350And 350 for the guy to come out and correct the immobiliser... He was meant to do the ECU bcm and pcm I guess he lied. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 4m 4d Gender: Male Location: Perth Posted 21/12/15 07:14 AM Share Posted 21/12/15 07:14 AM Your car still has the auto tune installed. Where are you located? Link to comment Share on other sites More sharing options...
Hussydabomb Member 81 Member For: 10y 1m 4d Posted 21/12/15 07:43 AM Author Share Posted 21/12/15 07:43 AM Your car still has the auto tune installed. Where are you located?hey I'm in Heidelberg West, I've spoken to Northern EFI and they said take it in tomorrow and they will re flash the ecu to manual and see what happens. The Hand signal and car are still flashing every now and then on the dash indicating a immobiliser issue.I did re flash it using the SCT 4 to a custom tune done from horsepower Factorythe engine does not splutter at all no knocking or anything of that natureit will only go a max of 42km/h in any gear and what I siad earlier about it not going over 2.5k RPM is incorrect, it goes a max of 42km/h depending on the gear you are in example1st gear is aprox 3,5k RPM2nd gear is 2.5k RPM3rd is around 2k RPMI ran the OBD II on torque and came up with this all issues relating to the PCM and auto transmission? I firmly believe the PCM is not in sync with the ECU windows print screen imgurl image sharing image hosting over 5mb image hosting above 5 mb upload a picture Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 4m 4d Gender: Male Location: Perth Posted 21/12/15 08:06 AM Share Posted 21/12/15 08:06 AM The PCM is the ECU in this case.The car is looking for the Auto Trans and cannot find it. It's a very easy fix for your tuner to sort out. Link to comment Share on other sites More sharing options...
Hussydabomb Member 81 Member For: 10y 1m 4d Posted 21/12/15 08:14 AM Author Share Posted 21/12/15 08:14 AM The PCM is the ECU in this case.The car is looking for the Auto Trans and cannot find it. It's a very easy fix for your tuner to sort out.yeah after reading all 13 error codes I came to the conclusion that it's looking for the auto.. I've booked it in to be seen tomorrow. wish me luck fellas and thanks heaps for the advice really appreciate it Link to comment Share on other sites More sharing options...
Lennox Member 2,586 Member For: 11y 11m 1d Gender: Male Location: Perth Posted 21/12/15 09:39 AM Share Posted 21/12/15 09:39 AM Good luck with it and be sure to come back and let us know how it goes! Seriously considering it cos my zfs due for a rebuild and it would be cheaper to just go manual and have more fun. . Have a couple of mates that would do the labor part as well. .Is it tr6060 gearbox you're chucking in? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now