PSI EGO New Member 9 Member For: 9y 5m 9d Posted 17/12/15 10:34 AM Share Posted 17/12/15 10:34 AM Hey allIm currently fitting up a fg xr6 turbo log manifold to my bf xr6 turbo.Got a few questions.1) anybody have a factory fuel rail to suit for sale?2) im looking to upgrade my intercooler setup. Whats on the market that will fit good? Will it have provisions for boost sensor?3) whats a good blow off valve?4) looking to upgrade the standard actuator. Whats good here?Im new to xr6 turbo's so need abit of guiding in choices.Cheers allRohan Link to comment Share on other sites More sharing options...
Tocchi Sandtrap Motorsport Donating Members 2,055 Member For: 16y 1m 9d Gender: Male Location: Perth Posted 17/12/15 10:44 PM Share Posted 17/12/15 10:44 PM (edited) 1) Fg turbo rails are a dime a dozen. Looking at like $50 when you find one2) any b series hot side will still fit, and most of the cold side will fit. I used an elbow off the FG TB and then an alloy bend to the B series cooler kit piping at the passenger headlight.Boost sensor is on the FG TB elbow 3) unsure4) Turbosmart is good. People who say it's bad are people who don't know how to set it up / preload it Edited 17/12/15 10:44 PM by Tocchi 1 Link to comment Share on other sites More sharing options...
PSI EGO New Member 9 Member For: 9y 5m 9d Posted 18/12/15 07:10 AM Author Share Posted 18/12/15 07:10 AM Got the fuel rail from a wrecker for $100Regarding the intercooler setup looking at a complete new kit I.e a hdi etcThe kit on mine is all stock piping with a sh*tty monza cooler runs all piping on the drivers side. Thanks for the info mate will look into the turbosmart gear Link to comment Share on other sites More sharing options...
barnz Member 3,047 Member For: 11y 1m 14d Gender: Male Location: Brisbane Posted 18/12/15 07:45 AM Share Posted 18/12/15 07:45 AM Whilst the HDI kit works OK for its price point I suppose...your not going to like its VL spec fitment. I would personally spend a little more and get a more reputable kit.For me it would be Jonny Tigs no cut cooler. Link to comment Share on other sites More sharing options...
Skids4kids in the mid....not the bum like some Member 609 Member For: 11y 8m 11d Gender: Male Posted 18/12/15 08:17 AM Share Posted 18/12/15 08:17 AM (edited) Fella has a B series so he is going to need cutting if he gets one of Jon's coolers.I carried out a FG manifold conversion/fuel system(used FG throttlebody) a couple weeks ago on a BF and it had said cooler fitted....tight fit is all I can say and IMO fitment was a little less than desirable....spacers are needed on a few parts or some fine trimming carried out on areas one wouldn't expect.3psi pressure drop across the core also and I can only assume that's normal for this cooler? Edited 18/12/15 08:20 AM by Skids4kids 1 Link to comment Share on other sites More sharing options...
turboknapp Donating Members 783 Member For: 17y 9m 11d Gender: Male Location: perth w.a Posted 18/12/15 09:51 PM Share Posted 18/12/15 09:51 PM Where did you get the piping from the TB to the cooler cold side? Link to comment Share on other sites More sharing options...
Skids4kids in the mid....not the bum like some Member 609 Member For: 11y 8m 11d Gender: Male Posted 18/12/15 09:58 PM Share Posted 18/12/15 09:58 PM It was custom made mate by Jon Bailey aka Jonny Tig. Link to comment Share on other sites More sharing options...
turboknapp Donating Members 783 Member For: 17y 9m 11d Gender: Male Location: perth w.a Posted 18/12/15 11:42 PM Share Posted 18/12/15 11:42 PM Nice bit of gear, I need that for my FG manifold conversion Link to comment Share on other sites More sharing options...
PSI EGO New Member 9 Member For: 9y 5m 9d Posted 19/12/15 02:58 AM Author Share Posted 19/12/15 02:58 AM Thanks for the help guys.Does jonny tig do full kit you can purchase or does he need the car? Im in melbourne so sa is abit too far away.Regarding bov's whats better plumb back or full straight to atmosphere? Link to comment Share on other sites More sharing options...
OZYWALKER XR50T Gold Donating Members 2,795 Member For: 11y 8m 2d Gender: Male Location: Western Sydney Posted 19/12/15 09:21 AM Share Posted 19/12/15 09:21 AM Tig does some great gear.Bov is up to you, vented isn't legal and plumb back is, dual port is best of both worlds and has blanking caps available so legal is possible. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now