Jump to content

Recommended Posts

  • Donating Members
  • Member For: 16y 5m 7d
  • Gender: Male

Nice Sydney roads. At $80 - $90 per set, these whiter globes would need to last heaps longer than they have for me to bother buying them again. I might put one of the factory globes back into the LHS. Or drop in one Spiro again. As stated above, one of Spiro's mechanics told me they no longer sell these whiter globes.

Edited by PAH
  • Gold Donating Members
  • Member For: 10y 2m 3d
  • Gender: Male
  • Location: Canberra ACT

Narva 50+ pair around $40 on ebay. For the 18m life this seems reasonable for the extra light I get in the EL. Nice and white too.

I'm actually not sure what's in the BA as they haven't blown in the time I've had it.

If you change globes make sure you get a tune☺

  • Like 1
  • Member
  • Member For: 16y 11m 9d
  • Gender: Male
  • Location: Perth, Western Australia

Girlfriend's previous two taxis (BFII wagon and BFIII wagon) used to both go through headlight globes at a rapid rate.

And she cruises around like Driving Miss Daisy. She's slow.

Meanwhile, I go through one or two globes a year, at the most.

And I drive the car as though it's in Formula 1.

These days I keep a spare globe in the bottom of the airbox.

I buy globes in packets of 10 when they're on special at Covs.

Always wanted to try the IPF Fatboy globes. That's what the 4WD crew use, and they're also a higher output globe.

  • less WHY; more WOT
  • Site Developer
  • Member For: 17y 2m 16d
  • Gender: Male
  • Location: Melbourne

Lesson 1: don't buy "whiter" halogen globes if they have any coating on the glass. They just don't last and have lower light output, if anything.

Lesson 2: HID replacement FTW! Better colour, more reliable (if installed correctly) and sometimes cheaper than a "whiter" set.

  • MattyP
  • Cruise Control
  • Member For: 13y 1m 22d
  • Gender: Male
  • Location: Central Coast

Projector lens its almost a must with any hid kit has the scatter can be too much for oncoming traffic

  • Like 2
  • less WHY; more WOT
  • Site Developer
  • Member For: 17y 2m 16d
  • Gender: Male
  • Location: Melbourne

When installed and aimed correctly, regular "reflector" style headlamps are acceptable with regard to scatter. Even scattered they have heaps more light output then a regular halogen :)

  • MattyP
  • Cruise Control
  • Member For: 13y 1m 22d
  • Gender: Male
  • Location: Central Coast

Agreed

I personally prefer the pattern of a projector though

Ive seen some shocking hid installs in reflectors and you just get totally blinded

  • less WHY; more WOT
  • Site Developer
  • Member For: 17y 2m 16d
  • Gender: Male
  • Location: Melbourne

Agreed on both counts. It must be installed and aimed correctly in a reflector.

Projector is just better for a "cleaner/smoother" light output, but for a large proportion of cars, there's no good (cheap/easy) way to get projector lenses into the factory position :(

  • Like 1
  • Member
  • Member For: 11y 7m 6d
  • Gender: Male
  • Location: Brisbane

Just been over all of what both of you have said with my brother and his PK ranger. Sent me a pic of his new HID's. I said your a penut dont put them in reflector lights. Surprisingly there are no aftermarket projectors for PK. With some tweaking they are less blinding to oncoming traffic.

Projectors can be aimed more accurately BUT, at the right approach angle oncoming traffic still cops it. This is true even in oem applications. In a perfect world we would drive on flat roads and it wouldnt be a problem.....

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'