Jump to content

K13Th's car.


Rab

Recommended Posts

  • FREAKY
  • Donating Members
  • Member For: 14y 11m 16d
  • Gender: Male
  • Location: Melbourne
1 hour ago, k31th said:

bulking FTW! (actually not bulking much due to genetic disadvantage :P )

can be done mate, ive done it. left high school in the mid 60kg mark. hit 80 last year.

Link to comment
Share on other sites

  • less WHY; more WOT
  • Site Developer
  • Member For: 16y 8m 1d
  • Gender: Male
  • Location: Melbourne

I know some can be done. Specifics that I'm not willing to commit to with regard to training due to conflicting goals. 

Link to comment
Share on other sites

  • To Loud
  • Gold Donating Members
  • Member For: 13y 11d
  • Gender: Male
  • Location: WA, Perth

so how can one get their car engineered, if you won't pass the emissions test with 100CPI cat?

It means going back to stock cat which is 400CPI and renders the tune useless.

 

I have asked this before and I have not had a reply. Maybe because it is a stupid question.

However I will ask it again. Is it possible to use two 400CPi cats next to each other if space was not a factor?

Well I was thinking, from the turbo you use a 4" dump which then splits into a Y.

The Y will allow you to have the first cat as close as possible to stock position and the second cat a tad further down.

Maybe I should draw a drawing.

Would this flow better and pass emissions?

Link to comment
Share on other sites

  • Member
  • Member For: 16y 4m 25d
  • Gender: Male
  • Location: Perth, Western Australia
21 hours ago, masda74 said:

So k31th is having the same problems as phil has in regarss to the 5 gas emmission tests to get the car over the pits?

 

It's all about ADRs, which are federal (ie nationwide, the same across all states).

 

However, I'm told that we do a 5-gas test here in WA, which is easier than a full test.

 

Apparently the factory cat is the one to have.

 

The trick would be to find someone who has actual hands-on experience with this.  

 

It be be done.  First step is to get a standard cat as hot as possible.  If that doesn't pass then it's time to play with HP Tuners.

 

I found a place here in Perth (Garage 101) that has both an emissions testing machine and HP Tuners.  That's the combination to find, but it turned out that HP Tuners wasn't necessary in the end.

 

Running E10 or E85 might also get the car half way there.  Dunno.  That's a question for someone who has experience with getting cars through emissions tests.

Link to comment
Share on other sites

  • All stock bar the k&n panel filter
  • Silver Donating Members
  • Member For: 12y 8m 28d
  • Gender: Male
  • Location: Perth

I had a mate who threw an LS3 into his VX sedan. Did the work and tune himself in HP tuners and rocked up to the emissions testing place with his laptop and the dude let him tinker with the tune until it passed. Keith, you like computers...do that.

  • Like 1
Link to comment
Share on other sites

  • Moar Powar Babeh
  • Lifetime Members
  • Member For: 19y 2m 18d
  • Gender: Male
  • Location: Perth

I tuned a barra swapped patrol about 3ys ago that passed emissions testing just fine. 

 

Seriously it's not fucking rocket surgery. Examine what the OEM did apply the principles to the tune and hardware and get on with life. There's no tricks,  no smoke and mirrors.

 

Furthermore an engine is just an air pump. 

 

Control what goes in and you can control what goes out. 

  • Like 2
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'