JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 7m 10d Gender: Male Location: Adelaide Posted 20/10/15 01:33 AM Share Posted 20/10/15 01:33 AM Ull have to pull the cover then mate Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 18d Gender: Male Location: Perth Posted 20/10/15 02:02 AM Share Posted 20/10/15 02:02 AM ^Whs. Best way. Lost lift method is too complicated. I got super lucky last one I did...less the 3 turns. Link to comment Share on other sites More sharing options...
knowhereman Donating Members 107 Member For: 13y 3m 14d Gender: Male Location: Torquay, Vic Posted 20/10/15 02:11 AM Author Share Posted 20/10/15 02:11 AM FARK!!! Link to comment Share on other sites More sharing options...
knowhereman Donating Members 107 Member For: 13y 3m 14d Gender: Male Location: Torquay, Vic Posted 20/10/15 02:54 AM Author Share Posted 20/10/15 02:54 AM The manual says sump off. Do I really have to take sumpOff to get front cover off? Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 18d Gender: Male Location: Perth Posted 20/10/15 03:53 AM Share Posted 20/10/15 03:53 AM No,its tight but you can remove the two bolts from the sump to the timing cover and gently walk the cover off. But you need a new u seal for the sump and you probably need a puller for the balancer Link to comment Share on other sites More sharing options...
knowhereman Donating Members 107 Member For: 13y 3m 14d Gender: Male Location: Torquay, Vic Posted 20/10/15 09:30 PM Author Share Posted 20/10/15 09:30 PM ok, if I am going to do this, then what else should I replace while I am it. Car is a 2004 XR6T MKII, 98,000km Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 7m 10d Gender: Male Location: Adelaide Posted 20/10/15 09:36 PM Share Posted 20/10/15 09:36 PM Timing chain guides if your already there Got some spare coin, go oil pump gears 2 Link to comment Share on other sites More sharing options...
knowhereman Donating Members 107 Member For: 13y 3m 14d Gender: Male Location: Torquay, Vic Posted 22/10/15 06:13 AM Author Share Posted 22/10/15 06:13 AM Ok got the puller for the balancer How do you go about pressing the balancer back on? Cant hit it on and I was told not to use the bolt to drive it on. Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 7m 10d Gender: Male Location: Adelaide Posted 22/10/15 06:16 AM Share Posted 22/10/15 06:16 AM Clean the spindle splines really well and clean the balancer as well then use some inox spray Lightly tap it with a rubber mallet and it will go all the way home with ease if the parts are well cleaned and lubricated The bolt might take up the last mm or two no stress Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 18d Gender: Male Location: Perth Posted 22/10/15 06:39 AM Share Posted 22/10/15 06:39 AM Why wouldn't you use the bolt to pull it home? 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now