The Jizard GONE FULL WIZARD Donating Members 1,617 Member For: 15y 11m 16d Gender: Male Location: 720 East Kensington Road Posted 10/08/12 01:11 AM Share Posted 10/08/12 01:11 AM (edited) Can I data log mine using HP Tuners with the SCT tune, last time on the dyno for sh*ts and giggles it played around, it's doesn't seem to be the tune but something to do with the engine, generally seems fine on the road but it hasn't been taken to ten/tenths on the road to see if it replicates it in the real world. It seemed to stop at 5000rpm for a few seconds then went again, the graph looked as wavey as a choppy day at the lake, didn't log it while on the dyno because we were just playing around on a friday night. The only thing that has been changed since the tune 3.5 years ago was the diff ratio from 2.73 standard ZF ratio to 3.46 BA 4Speed ratio, would the ratio change mess with the tune, in my experience no but that is mostly NA V8 Commodores. that's the only physical part change but maybe my engine is getting tired, 07 BFII F6 84,000km's been tuned since 33,000km's. It showed a lot more torque in the midrange than my mates 6L VX with heaps of work and has 15 more rwkw's than me. Pushing 17psi in the mid. Edited 10/08/12 01:18 AM by Foon Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 29d Gender: Male Location: Perth Posted 10/08/12 01:42 AM Author Share Posted 10/08/12 01:42 AM hey ralph, sent you pm but have not received anything... wheres the love?Tonight I will sit down and send out some stock tunes to the people that have asked for them. Been a bit busy with work Paulie Link to comment Share on other sites More sharing options...
Paulie2256 Donating Members 7,441 Member For: 16y 1m Gender: Male Location: SE Melbourne Posted 10/08/12 01:50 AM Share Posted 10/08/12 01:50 AM no problem mate, I thought you may have forgotten. Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 5m 14d Gender: Male Location: OZ Posted 10/08/12 04:04 AM Share Posted 10/08/12 04:04 AM xcal3 can't log the ford specific PIDs aka direct memory requests for the BA and you have to use an xcal2.Can I data log mine using HP Tuners with the SCT tune, last time on the dyno for sh*ts and giggles it played around, it's doesn't seem to be the tune but something to do with the engine, generally seems fine on the road but it hasn't been taken to ten/tenths on the road to see if it replicates it in the real world. It seemed to stop at 5000rpm for a few seconds then went again, the graph looked as wavey as a choppy day at the lake, didn't log it while on the dyno because we were just playing around on a friday night. The only thing that has been changed since the tune 3.5 years ago was the diff ratio from 2.73 standard ZF ratio to 3.46 BA 4Speed ratio, would the ratio change mess with the tune, in my experience no but that is mostly NA V8 Commodores. that's the only physical part change but maybe my engine is getting tired, 07 BFII F6 84,000km's been tuned since 33,000km's. It showed a lot more torque in the midrange than my mates 6L VX with heaps of work and has 15 more rwkw's than me. Pushing 17psi in the mid.Re-tune time if you have changed the diff ratio :-) 1 Link to comment Share on other sites More sharing options...
MX Dave Donating Members 545 Member For: 13y 8m 17d Gender: Male Posted 11/08/12 11:31 AM Share Posted 11/08/12 11:31 AM Gents, is it possible to set a rpm limit with just an xcal3 and live link or another program? Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 5m 14d Gender: Male Location: OZ Posted 12/08/12 03:10 AM Share Posted 12/08/12 03:10 AM Yeah with an xcal3, if the supplier enables user adjustments then you can do it yourself. Otherwise HPT is another option if you want to expand on things. Link to comment Share on other sites More sharing options...
turbotrana Member 2,586 Member For: 21y 8m 22d Gender: Male Posted 12/08/12 03:38 AM Share Posted 12/08/12 03:38 AM (edited) I just ordered VCM pro from this ebay site, being delivered from US for $US700.http://cgi.ebay.com....em=200588303550And yes he said it supports our Aussie Ford Turbos.It might be a mistake as I am sure the Australian VCM does provide some support whereas I dont see this ebay guy giving any support.Nevertheless its Sunday afternoon and a purchase on ebay or online is just a few clicks away, I just couldn't be bothered waiting till Monday to ring up the Aust VCM suite, just too hard. Edited 12/08/12 03:41 AM by turbotrana Link to comment Share on other sites More sharing options...
MX Dave Donating Members 545 Member For: 13y 8m 17d Gender: Male Posted 12/08/12 03:44 AM Share Posted 12/08/12 03:44 AM Yeah with an xcal3, if the supplier enables user adjustments then you can do it yourself. Otherwise HPT is another option if you want to expand on things.Supplier as In Tuner, Or supplier as in person I bought it from.. Shame I got it off eBay if that's the case Link to comment Share on other sites More sharing options...
Paulie2256 Donating Members 7,441 Member For: 16y 1m Gender: Male Location: SE Melbourne Posted 13/08/12 12:53 AM Share Posted 13/08/12 12:53 AM (edited) I just ordered VCM pro from this ebay site, being delivered from US for $US700.http://cgi.ebay.com....em=200588303550And yes he said it supports our Aussie Ford Turbos.It might be a mistake as I am sure the Australian VCM does provide some support whereas I dont see this ebay guy giving any support.Nevertheless its Sunday afternoon and a purchase on ebay or online is just a few clicks away, I just couldn't be bothered waiting till Monday to ring up the Aust VCM suite, just too hard.Hey mate, I think they may still give you support since at the end of the day it is their product. The ebay seller may be an authorised re-seller or distributor. If so its all good. Edited 13/08/12 12:53 AM by Paulie2256 Link to comment Share on other sites More sharing options...
Mr_4.0 Member 1,096 Member For: 13y 11m 3d Posted 13/08/12 01:59 AM Share Posted 13/08/12 01:59 AM I've data logged my ba with xcal3. Few things I can't log. Knock sensor for example. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now