Puffwagon Trust me bro... Gold Donating Members 16,057 Member For: 9y 11m 17d Gender: Male Location: South Australia Posted 27/07/18 01:22 AM Share Posted 27/07/18 01:22 AM Far out man I should have looked a bit harder. I've bought several things from T.I Performance over the years and never had any problems. My tech edge wb is still going strong after 5 years! Jason even helped me out with a modified xdf for my AU when I wanted to scale the injectors to run e85. 1 Link to comment Share on other sites More sharing options...
El Andrew Gold Donating Members 2,036 Member For: 9y 8m 24d Gender: Male Location: Canberra ACT Posted 27/07/18 01:33 AM Share Posted 27/07/18 01:33 AM Thanks mate - we buy them direct from Tactrix (with genuine serial number) and have plenty in local stock for same day dispatch via Express Post at https://www.tiperformance.com.au/products/tactrix-openport-2-0-pcmtec-ecuflash/ Cheers,JasonNo worries. Have bought a few things from you guys and service and price has always been excellent. I expect I'll be sniffing around for a pump and injectors for the FG soon 1 Link to comment Share on other sites More sharing options...
Puffwagon Trust me bro... Gold Donating Members 16,057 Member For: 9y 11m 17d Gender: Male Location: South Australia Posted 27/07/18 01:40 AM Share Posted 27/07/18 01:40 AM 4 minutes ago, El Andrew said: pump I have a walbro 460 from them. 2 Link to comment Share on other sites More sharing options...
bjc Donating Members 2,823 Member For: 21y 4m 11d Gender: Male Location: Townsville Posted 27/07/18 04:07 AM Share Posted 27/07/18 04:07 AM To confirm....the xcal3 device does not work with PCMTec? I'm about to buy the Tactrix from T.I.Performance if the xcal3 doesn't so what else can I buy from them so the missus can spew her tits off at me!? What brand are most using for a wide band AFR sensor with gauge? Innovate? Links please as I'm on zero sleep, 8 coffees and haven't hit buyers remorse yet! Link to comment Share on other sites More sharing options...
Puffwagon Trust me bro... Gold Donating Members 16,057 Member For: 9y 11m 17d Gender: Male Location: South Australia Posted 27/07/18 04:23 AM Share Posted 27/07/18 04:23 AM My innovate is getting on 8 years. I replaced the sensor once cos it got flooded by an o ring failure. 10 minutes ago, bjc said: what else can I buy from them so the missus can spew her tits off at me!? Haha head over to Goleby's and pick up a new turbo kit. 1 Link to comment Share on other sites More sharing options...
rollex Member 683 Member For: 10y 7m 7d Gender: Male Location: Australia Posted 27/07/18 05:06 AM Share Posted 27/07/18 05:06 AM Xcal is a proprietary device so we can't support that. Any J2534 cable should be good to go though m Link to comment Share on other sites More sharing options...
bjc Donating Members 2,823 Member For: 21y 4m 11d Gender: Male Location: Townsville Posted 28/07/18 05:19 AM Share Posted 28/07/18 05:19 AM Yeh I just thought that because you can plug an xcal3 into the OBD2 port AND log through it from a laptop that the xcal3 would have the J2534 chip internally so effectively you're bypassing the xcal3 software using the PCMTec software piggybacking through it....but obviously not Link to comment Share on other sites More sharing options...
rollex Member 683 Member For: 10y 7m 7d Gender: Male Location: Australia Posted 28/07/18 07:26 AM Share Posted 28/07/18 07:26 AM (edited) J2534 is a software standard rather than a hardware implementation, there is absolutely no reason why an XCAL couldn't implement it, the fact is they just don't. Same goes for a HPTuners dongle, they could fairly easily implement a J2534 windows driver if they thought there was a market for it. I know people have asked about it on their forums, their answer was "yes its possible" and that was about it haha. Edited 28/07/18 07:27 AM by rollex Link to comment Share on other sites More sharing options...
DarrylC Member 51 Member For: 12y 2d Posted 08/08/18 12:59 PM Share Posted 08/08/18 12:59 PM For those interested in the Flex Fuel for the Falcon it should be delivered to our two testers tomorrow. At this stage it is only running in my car and I am still optimizing the final version of the code whilst Roland adds some really neat features to the editor to support it. Basically the code works by reading the Flex Fuel sensor for a % ethanol reading and then uses different blend rams for things like Stoich MBT, cold start table, spark and boost. Bend tables can be changed individually for each table and I have added a few custom ones for fun. Here is the sample of what we have included in the Flex tables: Our testers (IMS and Springy Performance) will be getting a more friendly version, this was only to show yo some of what is in there. 5 Link to comment Share on other sites More sharing options...
Puffwagon Trust me bro... Gold Donating Members 16,057 Member For: 9y 11m 17d Gender: Male Location: South Australia Posted 08/08/18 01:12 PM Share Posted 08/08/18 01:12 PM Looks like I'll be adding an ethanol content sensor to the list. I never bothered before cos it only takes a few flashes to guess a good enough tune when swapping over. This will allow for much more precise tuning and obviously not having to retune with varying blends. Haha the excitement kinda feels like xmas! 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now