rollex Member 683 Member For: 10y 5m 23d Gender: Male Location: Australia Posted 08/03/18 08:26 AM Share Posted 08/03/18 08:26 AM Currently our income is approaching our target. I hope by the end of the year it will be there. We are already ahead of the bell curve as most businesses don't make a profit for the first 3 years. We've only been live since November. Roughly 90 cars tuned with PCMTEC so far and growing. As Darryl said training and scoping work for third parties often takes longer than just doing it yourself. To get the quality of staff we need would be too expensive at this stage so we will continue to grind it out for a while. As Darryl said the next project in the works is the datalogger, Darryl will has already mapped pretty much everything ready to go for it, we just need to develop the ui which is by far the main job. Hoping to release it in stages. Basic csv logger, 2d graph logger, full blown logger with histograms and gauges. 2 Link to comment Share on other sites More sharing options...
tazzanz Donating Members 573 Member For: 9y 3m 30d Gender: Male Location: NZ Posted 08/03/18 08:34 AM Share Posted 08/03/18 08:34 AM Wow, what a game changer!! Link to comment Share on other sites More sharing options...
El Andrew Gold Donating Members 2,035 Member For: 9y 7m 9d Gender: Male Location: Canberra ACT Posted 08/03/18 08:37 AM Share Posted 08/03/18 08:37 AM I'm simultaneously reading and learning, while prepping the car for tuning (sorting a few issues, major service items, brakes, trans cooler, etc).Was planning to go the HP route but this is seriously tempting me. Link to comment Share on other sites More sharing options...
MattyP MattyP Cruise Control 6,317 Member For: 12y 6m 27d Gender: Male Location: Central Coast Posted 09/03/18 10:45 AM Share Posted 09/03/18 10:45 AM Yup, I've got to sit down and go through your software and see if I even CAN flash tune (have experience with aftermarket that went well but this is completely different) Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,929 Member For: 9y 10m 2d Gender: Male Location: South Australia Posted 09/03/18 10:58 AM Share Posted 09/03/18 10:58 AM Matty, flash tuning isn't that hard. You just need to be a bit more organised with it. It helps to know how much effect the changes you make affect the tune, but that comes with time. Link to comment Share on other sites More sharing options...
DarrylC Member 51 Member For: 11y 10m 18d Posted 20/03/18 11:11 PM Share Posted 20/03/18 11:11 PM On 3/8/2018 at 11:04 AM, DarrylC said: For those interested PCMTec is working on Custom Tunes see: https://forum.pcmtec.com/index.php?/topic/25-custom-tunesgear-based-boost-control-for-baba-and-early-fg/ This is a very different level of tuning and goes beyond the OEM Calibrator level we currently support. Soon you will be able to do things like: Gear Based Boost Control for the BA/BF/FG Change table axis like using VSS or Gear instead of Intake temperature for the Boost and Wastegate tables Change decision points for thinks like Open Loop Fuel (make it MAP dependent). Increase table resolutions Add custom axis We think this will change the Ford Falcon tuning landscape forever Cautious optimism Apart from a logging issue with HP Tuners (it cant log custom OSes and SCT corrupted OSIDs) it looks like the boost by gear test we have done is working. For the earlier FGs we have an improved solution for the gear based boost control. I will extend the scope to have a look at torque management by gear as well. Rolls and I will now be working in integrating this into the PCMTec Editor and we will provide updates on the forum link as it progresses. 4 Link to comment Share on other sites More sharing options...
El Andrew Gold Donating Members 2,035 Member For: 9y 7m 9d Gender: Male Location: Canberra ACT Posted 21/03/18 09:27 AM Share Posted 21/03/18 09:27 AM I'm simultaneously reading and learning, while prepping the car for tuning (sorting a few issues, major service items, brakes, trans cooler, etc).Was planning to go the HP route but this is seriously tempting me.Well, I've bought a J2534 cable and told the wife to hit me up with the software for my birthday in a few weeks! 1 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,004 Member For: 16y 7m 21d Gender: Male Location: Melbourne Posted 21/03/18 11:28 AM Share Posted 21/03/18 11:28 AM and what did the ole ball and chain think? Link to comment Share on other sites More sharing options...
El Andrew Gold Donating Members 2,035 Member For: 9y 7m 9d Gender: Male Location: Canberra ACT Posted 21/03/18 11:41 AM Share Posted 21/03/18 11:41 AM Haha - just rolled her eyes. She was complaining the 200kW Toyota was "way too slow" so she knows where it's at. Link to comment Share on other sites More sharing options...
MattyP MattyP Cruise Control 6,317 Member For: 12y 6m 27d Gender: Male Location: Central Coast Posted 21/03/18 11:42 AM Share Posted 21/03/18 11:42 AM Link to where you bought the cable? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now