Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 1m 30d Gender: Male Location: Perth Posted 06/08/12 05:59 AM Share Posted 06/08/12 05:59 AM Gents,Lets make this thread productive and keep it on topic.Please discuss you tuning endeavors and equipment/techniques used, also anybody interested in tuning their own car this is the place to ask.This thread is for DIY tuners, Forum Advertisers are welcome to offer there assistance if they wish to do so. KGO! 3 Link to comment Share on other sites More sharing options...
Paulie2256 Donating Members 7,441 Member For: 16y Gender: Male Location: SE Melbourne Posted 06/08/12 06:04 AM Share Posted 06/08/12 06:04 AM Ok lets start off with a list of H/W needed and price (if you have it). - VCM suite + 2 credits - Data logger (xcal2) $200- Knockbox $295 5qty minanything else? ratter don't say dyno lol Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 1m 30d Gender: Male Location: Perth Posted 06/08/12 06:07 AM Author Share Posted 06/08/12 06:07 AM Wide Band Air Fuel Ratio measuring equipment. $279 to $10000Edit: Link to comment Share on other sites More sharing options...
Paulie2256 Donating Members 7,441 Member For: 16y Gender: Male Location: SE Melbourne Posted 06/08/12 06:42 AM Share Posted 06/08/12 06:42 AM http://www.zeitronix.com/Products/zt2/zt2.shtml$279So the sensor already in the car is narrowband? Link to comment Share on other sites More sharing options...
SuckSqueezeBangBlow ʎǝʞuoɯ ɹoıuǝs Donating Members 1,808 Member For: 15y 11m 6d Gender: Male Posted 06/08/12 06:45 AM Share Posted 06/08/12 06:45 AM yes, factory 02 is narrowband.mazda 6 MPS has a factory wideband. Link to comment Share on other sites More sharing options...
spinr33 Donating Members 964 Member For: 13y 3m 5d Posted 06/08/12 07:18 AM Share Posted 06/08/12 07:18 AM Wide band Afr http://www.innovatemotorsports.com/products/lm2.php Link to comment Share on other sites More sharing options...
Paulie2256 Donating Members 7,441 Member For: 16y Gender: Male Location: SE Melbourne Posted 06/08/12 10:02 AM Share Posted 06/08/12 10:02 AM (edited) Just wondering if you could screw the wideband injust after the cat, would this be better than sticking into the tailpipe?Also could someone please list the common terminology and what it means an why it's important. AFRLambdaInjector scalingInjector duty cycleTiming advance/retardIntake tempDetonationWaste gate duty cycleMAPLoadEtc...etc (keep going) Edited 06/08/12 10:09 AM by Paulie2256 Link to comment Share on other sites More sharing options...
spinr33 Donating Members 964 Member For: 13y 3m 5d Posted 06/08/12 10:09 AM Share Posted 06/08/12 10:09 AM Yeah you can do that and put a gauge in the car , or just a bung in the exhaust and screw it in when required Link to comment Share on other sites More sharing options...
SuckSqueezeBangBlow ʎǝʞuoɯ ɹoıuǝs Donating Members 1,808 Member For: 15y 11m 6d Gender: Male Posted 06/08/12 10:42 AM Share Posted 06/08/12 10:42 AM I put a 2nd bung on dump Link to comment Share on other sites More sharing options...
turbotrana Member 2,586 Member For: 21y 7m 23d Gender: Male Posted 06/08/12 10:44 AM Share Posted 06/08/12 10:44 AM I am surprised that no one has done a tuning guide for VCM suite. I have seen guides for GM vehicles but no one so far has done a step by step guide for the tables to look at and adjust in VCM.The best place to put a wideband is on the turbo dump. Best just to weld in an extra bung. Using the tailpipe is not the best way as it does take time for the exhaust to get to the rear and it does not give a good reading at idle. If you datalog the data does not closely match RPM/Load when it is in the tailpipe. Tuners who use still use the tailpipe should be shot.Innovate have good wideband sensors and logging software.If you are a novice just forget the timing advance maps. If using stock maps any knock detection is not needed.You might need a SCT handheld tuner to datalog the Wideband along side RPM and MAP. It will give the best chance of knowing where you are in the tune. But I reckon you could get an inovate to get valid datalogging data also.I want to get rid of the Nizpro injectors in my car which was tuned with a SCT so I need to start getting familiar with the VCM software. I have alot of tuning experience so I can help there (that's easy) but I need help with the VCM software. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now