chekid New Member 4 Member For: 9y 6m 15d Posted 09/08/15 09:43 AM Share Posted 09/08/15 09:43 AM Hi guys. I have a question. I own an XR6 Turbo with an (a-r50 - <- wL->5) Turbo. it has recently decided to stop working, so I bought a new turbo and was told it would just bolt on. The new turbo says its (t04E - T3/t4). As we went to swap them, we realised the old turbo is water cooled as well as oil cooled. The new one isn't. Is there a way to fit the new one? and if not, is it possible to use the internals out of the new turbo for the old casing? Thanks in advance. Link to comment Share on other sites More sharing options...
Wilko16 Donating Members 1,672 Member For: 17y 3m 3d Gender: Male Location: Melbourne Posted 09/08/15 10:00 AM Share Posted 09/08/15 10:00 AM Your info is pretty vague... But you can remove and block the water lines, plenty of turbos are oil only Where did you buy the new turbo ? What model car ? 1 Link to comment Share on other sites More sharing options...
chekid New Member 4 Member For: 9y 6m 15d Posted 09/08/15 10:05 AM Author Share Posted 09/08/15 10:05 AM I bought the turbo off gumtree. The guy bought it for his BF but never put it on. But said it will definitely fit. I've got the BA 2005 xr6 turbo ute. So you're saying I can block the water lines and just run it without? how would I do that? Thanks for your time!! Link to comment Share on other sites More sharing options...
chekid New Member 4 Member For: 9y 6m 15d Posted 09/08/15 10:17 AM Author Share Posted 09/08/15 10:17 AM I can't install the new turbo because it will sit about 2inches higher, which means the exhaust would need to be modified etc. but can I just use the bearing carrier assembly out of the new turbo and fit it into my old turbo? Link to comment Share on other sites More sharing options...
turbotrana Member 2,586 Member For: 21y 10m 24d Gender: Male Posted 10/08/15 01:53 AM Share Posted 10/08/15 01:53 AM Don't bother with that turbo. Just find a proper garret that will bolt straight in. 1 Link to comment Share on other sites More sharing options...
Pixy Angel Expert Donating Members 9,132 Member For: 19y 11m 28d Gender: Male Location: North Jamberoo, NSW Posted 10/08/15 05:45 AM Share Posted 10/08/15 05:45 AM starting see why "he said he never fit it" I think is BS and he did and found the same problem your having.Ring him back and tell him youre returning it because it doesnt fit full refund. Link to comment Share on other sites More sharing options...
julesk_1972 Member 267 Member For: 12y 6m 29d Gender: Male Location: Perth Posted 10/08/15 06:30 AM Share Posted 10/08/15 06:30 AM Then in future, research the right item.Save $$$ and grief!Sent from my HTC One_M8 using Tapatalk 1 Link to comment Share on other sites More sharing options...
chekid New Member 4 Member For: 9y 6m 15d Posted 12/08/15 10:36 AM Author Share Posted 12/08/15 10:36 AM Thanks for the advice. I've ordered a new core for my old turbo. I think the problem is whoever owned my car before me had a large exhaust installed and it has changed the room I had previously for a turbo. All is good, as long as the turbo rebuild goes well! Thanks again Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now