Jump to content

Swapping From Gtx3576 To Gtx3582


747pwr

Recommended Posts

  • Member
  • Member For: 13y 9m 1d
  • Gender: Male

Hey guys as the title says I'm changing from the smaller gtx35 to the larger one, just wondering if the same silicone joiner from compressor inlet to airbox can be used? So I can order beforehand.

has a plaz 4inch race airbox.

I'll do a dyno overlay when its complete- it made approx 470rwhp in a FG mk2 completely maxxed with the 76, on 98 at 18psi. So ill do another run at 18psi and then maybe 20-22.

Mods were plaz stage 3 intercooler and pipework, x force 4inch exhaust, big valve springs, KPM 1000hp fuel module and 1000cc squirters, Atomic billet oil pump complete.

Im scared for the zf gearbox as im hoping to make 550rwhp with either 98 or e85, its the PWR heat exchanger so we'll see how it goes.

Edited by 747pwr
Link to comment
Share on other sites

  • billet turbos and weathered engines dont mix
  • Donating Members
  • Member For: 12y 6m 20d
  • Gender: Male
  • Location: Wollongong

You'll shiet in 550 with a gtx82, the 82 has a 4" intake. So if the 76 does aswell, you're all good

Link to comment
Share on other sites

  • billet turbos and weathered engines dont mix
  • Donating Members
  • Member For: 12y 6m 20d
  • Gender: Male
  • Location: Wollongong

Also, if it's a torquey tune the so is not going to like 400rwkw, from what I have read

Link to comment
Share on other sites

  • Donating Members
  • Member For: 21y 3m 8d
  • Gender: Male
  • Location: Townsville

Do you mean the GTX or GT version turbo's as I don't believe the GTX3576 would be maxed out with 18psi and 350rwkw unless you have other major restrictions like exhaust???

Trying to clarify...

  • Like 1
Link to comment
Share on other sites

  • Member
  • Member For: 13y 9m 1d
  • Gender: Male

GTX as the title and post says - im 100% sure. The car with above parts made 430rwhp with standard FG XR6T turbo maxxed, 470rwhp with the GTX3576 maxxed- so disregard the 18psi because with no exhaust, 4inch intake and no waste gate it couldnt make over 18psi, infact it only makes 18psi in the mid, tapers off to 16psi.

although only making 40hp different peak power the boost comes on alot sooner and it makes 90hp more in the mid, that's why I want to change to the gtx3582- should finally make the power and smash the tyres like I want.

Link to comment
Share on other sites

  • ...JD TUNING ADELAIDE...
  • Gold Donating Members
  • Member For: 16y 6m 11d
  • Gender: Male
  • Location: Adelaide

You don't have the 76 set up right if it can't create more than 18psi

These will go upwards of 25psi on a closed gate

  • Like 2
Link to comment
Share on other sites

  • I'm getten too old for this s**t
  • Bronze Donating Members
  • Member For: 11y 8m 5d
  • Gender: Male
  • Location: A big bridge over a river in South Australia

Agree

I run a bit over 20 on 98 - 400kw and another member sees 24 (I think) for 440 odd on e85 and he ran a 10.71 at 131 so I would suggest that the gtx..76 isn't the problem

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'