dilbo Member 25 Member For: 9y 10m 7d Posted 18/07/15 12:07 AM Author Share Posted 18/07/15 12:07 AM so while I pull the shaft in and out is it normal for the internals to sort of separate, while pullin on it it felt like was only holding by the rubber boot and as a result ive torn the boot in half and left with most of the shaft in my hand and everything after the boot still in the diff? Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 8m 12d Gender: Male Location: Adelaide Posted 18/07/15 01:19 AM Share Posted 18/07/15 01:19 AM Well then she was well farked Get in there and pull it, it'll pop and come out Link to comment Share on other sites More sharing options...
dilbo Member 25 Member For: 9y 10m 7d Posted 18/07/15 02:36 AM Author Share Posted 18/07/15 02:36 AM I thought the same thing, was making some terrible noises and had a sh*t load of play, its out had to lever it a bit. Link to comment Share on other sites More sharing options...
jas98 Member 1,046 Member For: 12y 6m 21d Gender: Male Location: Maryborough Qld Posted 18/07/15 02:53 AM Share Posted 18/07/15 02:53 AM I noticed with my after market shafs that its a tripod joint at the diff end not like the genuine one. So when I removed mine to swap diff I needed to leaver gentaly Link to comment Share on other sites More sharing options...
gaz097 Bronze Donating Members 1,752 Member For: 13y 6m 23d Posted 18/07/15 03:57 AM Share Posted 18/07/15 03:57 AM My pedders cv's need a gentle lever to get out, and a solid thump to get them back in. Link to comment Share on other sites More sharing options...
dilbo Member 25 Member For: 9y 10m 7d Posted 18/07/15 04:07 AM Author Share Posted 18/07/15 04:07 AM so how solid of a thump to get back in? been knocking it pretty hard and still about 8mm till its home but doesnt seem to want to go Link to comment Share on other sites More sharing options...
gaz097 Bronze Donating Members 1,752 Member For: 13y 6m 23d Posted 18/07/15 04:13 AM Share Posted 18/07/15 04:13 AM Solid. Kinda a 2 man job as you have to hold the inner up square. Link to comment Share on other sites More sharing options...
dilbo Member 25 Member For: 9y 10m 7d Posted 18/07/15 04:20 AM Author Share Posted 18/07/15 04:20 AM ive been fairly flogging it doesnt seem to want to go that last 8 or so mm, little worried I may break something if I hit much harder Link to comment Share on other sites More sharing options...
BenDoCo I'm getten too old for this s**t Bronze Donating Members 4,509 Member For: 11y 10m 6d Gender: Male Location: A big bridge over a river in South Australia Posted 18/07/15 04:23 AM Share Posted 18/07/15 04:23 AM ^^ yeah that.....hold it as square as possible when you hit it home. A person holding the shaft while you hit it and make sure you put the nut on abit to protect the thread. Something that we didn't liok at until it was almost toooo late was - Repco gave me a 28 spline shaft when I needed a 30 spline but thankfully it was noticed just before the shaft was hit home with the rubber mallet Link to comment Share on other sites More sharing options...
dilbo Member 25 Member For: 9y 10m 7d Posted 18/07/15 10:36 PM Author Share Posted 18/07/15 10:36 PM well cheers for the help guys, got one side done other should be easy now Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now