willg New Member 14 Member For: 12y 3m 18d Posted 08/07/15 05:25 AM Share Posted 08/07/15 05:25 AM Hi guys,I've searched high and low but can't find a definitive answer, so thought I would start a new topic.I am looking at a set of Work wheels:F 18x9 +30R 18x10 +38From what I have calculated (based on the factory 8J +36 wheels)Fronts will have 7mm less clearance, and poke out an extra 19mm - from what I understand this will be fine; is that true?Rears will have 27mm less clearance, and poke out an extra 23mm - the extra outer poke might be ok, but I think the 27mm less clearance might pose an issue. Can anyone confirm?CheersWill. Link to comment Share on other sites More sharing options...
bamk2f6tornado Bronze Donating Members 777 Member For: 11y 1m Gender: Male Location: Rockhampton Qld Posted 08/07/15 10:47 AM Share Posted 08/07/15 10:47 AM Iv got 10.5"+22 on the rear of my ute with 275's. If my quick maths is correct yours will sit in 10mm further than mine. From memory I have bucket loads of room on the inside so you should be sweet. Outside not so much 1 Link to comment Share on other sites More sharing options...
bamk2f6tornado Bronze Donating Members 777 Member For: 11y 1m Gender: Male Location: Rockhampton Qld Posted 08/07/15 10:49 AM Share Posted 08/07/15 10:49 AM Your fronts are going to be pretty close the the suspension though. I have 9.5"+22 with 235's fronts and have about 6mm clearance. So you will have about 4ish. Will be sweet but won't be able to run wide tyres 1 Link to comment Share on other sites More sharing options...
willg New Member 14 Member For: 12y 3m 18d Posted 08/07/15 11:06 PM Author Share Posted 08/07/15 11:06 PM Thanks for the input guys! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now