Valve Collet Droped Into The Sump

[ratter]

did he drop it down the front through the timing case or through one of the drain back holes?

If through the front, do not start the car until it is found

[genuine honest person]

must have been the back ,as it was the last ones he had to do ,I think . will message him now

[genuine honest person]

all good it went down the back holes . but the next bad thing is he has to change the timing chain guides ,so I send him some photos of the front cover taken of so he can see what it looks like . he has the inter cooler off etc . was it a good idea to tell him to change the bottom sproget with a atomic one and also to use a heavy duty atomic chain ? up to him if he wants to use it or not

[ratter]

if timing case is coming off then he should be able to get the collet assuming it's a B series

[genuine honest person]

ba with 6 speed auto ?

[genuine honest person]

he asked me where he could get the car tuned ,has new exhaust fuel pump -valve springs (less one collet lol) Corlette is north of New castle nsw . so who would be good to get a tune done down there ?

[julesk_1972]

Most definitely needs a new paper air filter.

Sent from my HTC One_M8 using Tapatalk

[genuine honest person]

I will let him know ,thanks

he also has some 60lb injectors ?

Edited 22/06/15 09:54 AM by genuine honest person

[julesk_1972]

Hdi cooler as well.

Sent from my HTC One_M8 using Tapatalk

[genuine honest person]

do not know what cooler he runs ,but the HDI is only a small cooler for a BA model so I would not recommend it on this one . but I would on a FG . thanks again for your help .