Remo New Member 3 Member For: 9y 6m 25d Posted 18/06/15 10:37 AM Share Posted 18/06/15 10:37 AM Hi all im new to this forum and will like some advice for my ba xr6 turbo t. When turbo is on boost from 2000pm to about 3500 its fine, after that it will start shuddering and loose boost and car revs will not go over then 5000rpm. Can anyone help? Thanks Link to comment Share on other sites More sharing options...
FiftyOne Bronze Donating Members 1,145 Member For: 11y 6m 11d Gender: Male Posted 18/06/15 10:59 AM Share Posted 18/06/15 10:59 AM (edited) Welcome mate. Soliniod and actuator could be a bit stuck. There's a thread around here re putting in a bit of wd40 to loosen it up. I'd also check the condition of the plugs and see if they are ok. Start with the little bits first Edited 18/06/15 11:00 AM by FiftyOne 1 Link to comment Share on other sites More sharing options...
jas98 Member 1,046 Member For: 12y 5m 20d Gender: Male Location: Maryborough Qld Posted 18/06/15 11:18 AM Share Posted 18/06/15 11:18 AM That sounds like ignition coils... Link to comment Share on other sites More sharing options...
Remo New Member 3 Member For: 9y 6m 25d Posted 18/06/15 01:09 PM Author Share Posted 18/06/15 01:09 PM Welcome mate.Soliniod and actuator could be a bit stuck. There's a thread around here re putting in a bit of wd40 to loosen it up. I'd also check the condition of the plugs and see if they are ok. Start with the little bits firstcheers will try that tomorrow Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 1m 19d Gender: Male Location: Probably above atmospheric pressure Posted 19/06/15 05:49 AM Share Posted 19/06/15 05:49 AM +1 could be coils breaking down under load too Link to comment Share on other sites More sharing options...
Remo New Member 3 Member For: 9y 6m 25d Posted 20/06/15 04:47 AM Author Share Posted 20/06/15 04:47 AM Welcome mate. Soliniod and actuator could be a bit stuck. There's a thread around here re putting in a bit of wd40 to loosen it up. I'd also check the condition of the plugs and see if they are ok. Start with the little bits firstThe wd 40 worked, now it doesnt stutter anymore at 5000rpm and goes over but the turbo still makes stuttering noise but not as loud. Its going in for a service on monday . Cheers 2 Link to comment Share on other sites More sharing options...
FiftyOne Bronze Donating Members 1,145 Member For: 11y 6m 11d Gender: Male Posted 21/06/15 12:04 AM Share Posted 21/06/15 12:04 AM Awesome. I imagine a new set of correctly gaped plugs and it will drive like new Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now