Fg F6 Rwkw With Minimal Mods Plus Tune

[20pounds]

Im wanting to get my fg f6 to around 330 340 rwkw with minimal mods. Want to keep it as stock looking as possible to the point of keeping factory airbox, crossover and exhaust. Ill cut a hole in front of airbox and maybe gut the cat. What else would I need to get me there?

[julesk_1972]

Hi flow cat, injectors, thermostat, bolt I cooler be nice to.

I done the above on my xr6t, got 299rwkw, cheap stepped cooler was holding it back.

[jaba010]

I would talk to your tuner, cooler, injectors cat you would easily make those numbers. I believe the standard induction side will handle your target.

[20pounds]

What are the standard f6 injectors good to?

[Bellato]

Standard f6 injectors and and cooler will get you to 300.

With an F6, high flow cat, cooler pipes and tune should net you about 300rwkw. To get to 340 then you're talking cooler, injectors and fuel pump. Then by that stage you're exhaust and valve springs will also be starting to hate you, but change them and you'll go 350+