PCW Donating Members 181 Member For: 16y 10m 26d Gender: Male Location: Melbourne Posted 01/06/15 08:57 AM Share Posted 01/06/15 08:57 AM Hi Guys,Not sure if anyone is interested, but thought I would put a shot up of the no holes clic0n dash mounts you can buy from www.holdmyphone.com.auI have used the one on the right for my Samsung Note 3 and the one on the left is for a new Icom IC-450 UHF radio I installed on the weekend.These are great mounts and removable without leaving any marks. Worth looking at if you need to mount a phone etc.Cheers,Pete 3 Link to comment Share on other sites More sharing options...
bupalooga Silver Donating Members 261 Member For: 12y 3m 23d Gender: Male Location: Griffith NSW Posted 10/06/15 02:42 PM Share Posted 10/06/15 02:42 PM Im using the one on the left side of the dash to do a tablet mount atm. A project in progress 1 Link to comment Share on other sites More sharing options...
Bulletime Donating Members 937 Member For: 14y 20d Gender: Male Posted 10/06/15 10:47 PM Share Posted 10/06/15 10:47 PM (edited) How sturdy are they? I use ram mount suctioned to the windscreen and they're very strong and sturdy. Can handle circuit work taking corners pretty hard and big bumps running off track. But be interested in these as well if they work well. Edited 10/06/15 10:48 PM by Bulletime Link to comment Share on other sites More sharing options...
ms700 Moderating Team 10,170 Member For: 21y 11m 29d Gender: Male Location: Sydney Posted 12/06/15 05:56 AM Share Posted 12/06/15 05:56 AM Im using Ram mounts that secures to the front passenger seat mount bolt - very happy Link to comment Share on other sites More sharing options...
Bulletime Donating Members 937 Member For: 14y 20d Gender: Male Posted 12/06/15 06:58 AM Share Posted 12/06/15 06:58 AM That's the same mount that the cops in the US use, pretty serious mount being bolted in. 1 Link to comment Share on other sites More sharing options...
rednose RNS10S Donating Members 2,229 Member For: 18y 5m 12d Gender: Male Posted 24/06/15 06:52 AM Share Posted 24/06/15 06:52 AM How sturdy are they? I use ram mount suctioned to the windscreen and they're very strong and sturdy. Can handle circuit work taking corners pretty hard and big bumps running off track.But be interested in these as well if they work well.They are very sturdy, done plenty of quarter mile passes and my handset doesn't move.Any one that buys this will not be disappointed.It is also a 2 part mounting system, so if you change your handset you just need to buy the handset holder to suit the new handset and keep your existing mount..Same goes for if you keep the phone but change cars, you just buy a new mount to suit the car and keep your existing handset holder Link to comment Share on other sites More sharing options...
ms700 Moderating Team 10,170 Member For: 21y 11m 29d Gender: Male Location: Sydney Posted 24/06/15 09:11 AM Share Posted 24/06/15 09:11 AM With my Ram Mount setup, if I change cars, I just unbolt my passenger seat bolt, remove mount, and re-install it into my new car. No damage to the car whatsoever. Link to comment Share on other sites More sharing options...
Bulletime Donating Members 937 Member For: 14y 20d Gender: Male Posted 24/06/15 10:56 AM Share Posted 24/06/15 10:56 AM Ms do you find it gets in the way of the passenger at all?Rednose they sound similar to the rammounts, different attachments for different devices, there are some adjustable ones but they don't hold the phone/tablet as tightly. Mines handled off tack excursions and bumps at wakefield so works pretty well. 1 Link to comment Share on other sites More sharing options...
Swindog Member 40 Member For: 11y 5m 21d Posted 25/06/15 09:15 AM Share Posted 25/06/15 09:15 AM How do the dash ones work if you have a case on your phone? I see on the website they are clean phones with a recess the phone sits in so looks like it wouldn't work with a case, even an ultra thin spigen. Link to comment Share on other sites More sharing options...
Bulletime Donating Members 937 Member For: 14y 20d Gender: Male Posted 25/06/15 10:06 AM Share Posted 25/06/15 10:06 AM Correct swindog, case will need to be off as they fit the devices dimensions snuggly, otherwise an adjustable mount would be needed, or take the case off. There's no way they would be able to predict the new size of phone plus case when every case is different, also doesn't make sense to Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now