Grego.77 Member 195 Member For: 9y 11m 26d Gender: Male Location: St Clair NSW Posted 12/06/15 09:47 AM Author Share Posted 12/06/15 09:47 AM How do I have the wrong barbs for 400 series hose?? Its push on hose with push on barbs? Just wire brushed off the plastic lines off the plastic barbs that ran to the tranny and 1/2" hose fitted VERY snug over that also. Some water hose clamps just in case to keep it secure. Link to comment Share on other sites More sharing options...
Grego.77 Member 195 Member For: 9y 11m 26d Gender: Male Location: St Clair NSW Posted 12/06/15 09:51 AM Author Share Posted 12/06/15 09:51 AM Diff-mount front inserts R 49178 Nolathane Bush Kit <if that's the bushes your saying are dead on yours?? Link to comment Share on other sites More sharing options...
bjc Donating Members 2,823 Member For: 21y 2m 10d Gender: Male Location: Townsville Posted 12/06/15 11:07 AM Share Posted 12/06/15 11:07 AM Hi mate, No it's the bush on the front diff drivers side. It stands upright. Here's an ebay link to it-http://pages.ebay.com/link/?nav=item.view&id=300697256935&alt=web Link to comment Share on other sites More sharing options...
Grego.77 Member 195 Member For: 9y 11m 26d Gender: Male Location: St Clair NSW Posted 12/06/15 02:00 PM Author Share Posted 12/06/15 02:00 PM Ahhh... yeah Iv got a spare front diff I know which one your talking about. C%$T of a job!! I didn't think that was a wearing part especially on something that's only done a 100k??? F that Id be doing a bogin special on it. I feel your pain and thanks for the heads up on that 1.m actually not going through Pedders. Their $28 report was full of bull. Got a better price including the same amount of work and than some and lifetime warranty on bushes and labor through Sydney Suspension. Shes booked in for next week. 1 Link to comment Share on other sites More sharing options...
Grego.77 Member 195 Member For: 9y 11m 26d Gender: Male Location: St Clair NSW Posted 12/06/15 02:12 PM Author Share Posted 12/06/15 02:12 PM And PWR for the trans. In series with a new heat exchangerMate I dont think running a heat exchanger inline is a good idea. Im pretty sure a few guys on here have had some bad experiences with those OEM units splitting causing your box to milkshake. I know for a fact my cousins near new FG split one earlier this yr. Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 18d Gender: Male Location: Perth Posted 12/06/15 02:29 PM Share Posted 12/06/15 02:29 PM Car is under warranty so I have to retain the factory cooler. If it fails I get a new gearbox. Once warranty if up I will fit PWR heat exchanger on custom brackets. same as I have on my BF.these are the fittings you need Link to comment Share on other sites More sharing options...
Grego.77 Member 195 Member For: 9y 11m 26d Gender: Male Location: St Clair NSW Posted 13/06/15 10:51 AM Author Share Posted 13/06/15 10:51 AM Damn your cars clean lol.... Its fitted and running without any dramas theres no restrictions so Ill keep it how it is. I think if I went to the creek for a run scrutinizes may have something to say about it because they may want braid. But Its a place Ill never go to and I know its a reliable fitting. Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 18d Gender: Male Location: Perth Posted 28/06/15 11:01 AM Share Posted 28/06/15 11:01 AM Coolers. 1 Link to comment Share on other sites More sharing options...
Grego.77 Member 195 Member For: 9y 11m 26d Gender: Male Location: St Clair NSW Posted 03/07/15 12:37 AM Author Share Posted 03/07/15 12:37 AM So good news for Territory owners stressing about transfer cases breaking. I just pulled my down and was shocked to see nothing wrong with it.... At first. The weak link is the chain, the rest of the transfer case is built extremely well. After checking all components theres no stressed parts even though the chain was jumping over the sprockets.. Pics below Link to comment Share on other sites More sharing options...
Grego.77 Member 195 Member For: 9y 11m 26d Gender: Male Location: St Clair NSW Posted 03/07/15 12:57 AM Author Share Posted 03/07/15 12:57 AM Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now