tommo224 Member 40 Member For: 9y 7m 22d Posted 22/05/15 01:29 AM Author Share Posted 22/05/15 01:29 AM TrutracSo, if my diff goes, all I need to do is purchase this and get it fitted, and I'm good to go? (let's ignore diff bushings for the purpose of this question, as they would get done too, or may have been upgraded by previous owner)http://www.ebay.com.au/itm/EATON-TRUE-TRAC-M86-BA-BF-FG-FORD-FALCON-XR6-TURBO-DETROIT-TRUTRAC-DIFF-LSD-/200912172575 1 Link to comment Share on other sites More sharing options...
tommo224 Member 40 Member For: 9y 7m 22d Posted 22/05/15 01:41 AM Author Share Posted 22/05/15 01:41 AM just an FYI, all 6 speed auto diff's are identical - 2.73 ratio LSD (except G6 models, some are not LSD). You don't need to go out of your way to source a FPV specific diff replacement.That's great, thank you for that! 1 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,064 Member For: 16y 8m 18d Gender: Male Location: Melbourne Posted 22/05/15 01:42 AM Share Posted 22/05/15 01:42 AM no worries Link to comment Share on other sites More sharing options...
tommo224 Member 40 Member For: 9y 7m 22d Posted 29/05/15 07:26 AM Author Share Posted 29/05/15 07:26 AM I ended up purchasing a M86 TrueTrack today, and booked in to CMS to get the rear diff bushings and diff swapped out Turns out the horrible noises and whining I was getting, was actually from the front wheel bearings! Took lots of me trying to work out where it was coming from, however, only a couple of minutes from someone who knows what to look for to figure out =PI should have gone to a pro to check it out sooner! But it's hard when you work full time and such. Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,064 Member For: 16y 8m 18d Gender: Male Location: Melbourne Posted 29/05/15 07:45 AM Share Posted 29/05/15 07:45 AM M86 TrueTrack today Good choice Glad you found out what it was - it's great when the car runs smoothly. Link to comment Share on other sites More sharing options...
PhilMeUp Member 1,045 Member For: 16y 5m 12d Gender: Male Location: Perth, Western Australia Posted 29/05/15 01:42 PM Share Posted 29/05/15 01:42 PM Turns out the horrible noises and whining I was getting, was actually from the front wheel bearings! Took lots of me trying to work out where it was coming from, however, only a couple of minutes from someone who knows what to look for to figure out =PSounds like you probably had the workshop do the job, but if not:Front bearing hubs are quick and easy to replace.Photo guide: http://www.fordxr6turbo.com/forum/topic/89016-photo-essay-babf-front-bearing-hub-replacementYou'll need a 36mm socket to undo the nut. I use a torque wrench (because I've got it) but basically just do the nut back up really, really tight.There are aftermarket choices, but they tend to not last very long. Do a search for the Ford part number on eBay (ie AU22B663A) and you'll find them cheap enough. 1 Link to comment Share on other sites More sharing options...
tommo224 Member 40 Member For: 9y 7m 22d Posted 29/05/15 10:19 PM Author Share Posted 29/05/15 10:19 PM (edited) Thanks Phil! $100 each online, pretty decent actually doesnt look too difficult, I could probably actually have done it myself. I just don't have the confidence :(It is daunting thinking of doing such things myself. Give me a computer and I can design you things, hand me a camera and I'll capture things for you. But hand me a spanner and I will look at you dazed. Haha. My mates are pretty good at these things, and I happily will hand them cash for helping out!Ford did it for me for $360 fitted (both fronts), and did it right away. Solved my problem and allowed me to get back to the office! I could have saved some cash by doing it myself or my mates, but I felt I needed it solved ASAP :( Edited 29/05/15 10:20 PM by tommo224 Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 5d Gender: Male Location: Perth Posted 30/05/15 01:55 AM Share Posted 30/05/15 01:55 AM $360 for both fitted is a steal. Do what you are good at and pay some other furker to do what he is good at is my motto. Makes the world go round. 2 Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 1m 4d Gender: Male Location: Probably above atmospheric pressure Posted 05/07/17 11:43 AM Share Posted 05/07/17 11:43 AM What if all you are good at is thread mining? 2 Link to comment Share on other sites More sharing options...
JETLAG New Member 6 Member For: 8y 3m 23d Posted 26/08/17 01:01 AM Share Posted 26/08/17 01:01 AM On 5/29/2015 at 4:56 PM, tommo224 said: I ended up purchasing a M86 TrueTrack today, and booked in to CMS to get the rear diff bushings and diff swapped out Turns out the horrible noises and whining I was getting, was actually from the front wheel bearings! Hey mate so did you end up getting the diff changed anyway / as well or didn't go through with it? If you did did you notice any benefits? What kinda dollars did it end up costing you? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now