OZYWALKER XR50T Gold Donating Members 2,795 Member For: 11y 6m 27d Gender: Male Location: Western Sydney Posted 17/04/16 05:27 AM Author Share Posted 17/04/16 05:27 AM (edited) So I've gone and ordered a ceramic coated 6 Boost factory position low mount manifold, it should arrive this week. Got the dump, turbo and manifold out eventually. Stripped a few nuts and bolts but got them out after heating them and using a smaller socket. Looks like this at the moment Should look something like this soon Plan is to heat wrap the dump and manifold and use turbo beanie to keep temps down. As for the water line I have ordered some 1/2" to -8 hard line adaptors with -8 teflon braid and hose ends to suit. I haven't seen any pics of anyone using the hard line adapters for the water line so hopefully it all goes together. Also ordered a stud kit for the manifold, turbo and dump. If there is anything else I should be looking at to get it all together any input is appreciated. Edited 17/04/16 05:28 AM by OZYWALKER 1 Link to comment Share on other sites More sharing options...
MattyP MattyP Cruise Control 6,317 Member For: 12y 6m 25d Gender: Male Location: Central Coast Posted 17/04/16 05:39 AM Share Posted 17/04/16 05:39 AM Na conversion going well 1 Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 6d Gender: Male Location: Perth Posted 17/04/16 08:56 AM Share Posted 17/04/16 08:56 AM Chris (Mummba) has used hardline adaptors to replumb for his high mount and borg warner 1 Link to comment Share on other sites More sharing options...
Krazy Kyle Get It To Wheelspin Uncontrolably Then Give It Another 5 Pounds Cruise Control 2,697 Member For: 14y 1m 8d Gender: Male Location: Work Posted 17/04/16 10:03 AM Share Posted 17/04/16 10:03 AM what was the 5 link worth? Link to comment Share on other sites More sharing options...
OZYWALKER XR50T Gold Donating Members 2,795 Member For: 11y 6m 27d Gender: Male Location: Western Sydney Posted 17/04/16 10:07 AM Author Share Posted 17/04/16 10:07 AM $4300 Add a day or so if your fitting it yourself or a days labour to fit it. Link to comment Share on other sites More sharing options...
OZYWALKER XR50T Gold Donating Members 2,795 Member For: 11y 6m 27d Gender: Male Location: Western Sydney Posted 17/04/16 10:10 AM Author Share Posted 17/04/16 10:10 AM Worth it if your keeping the ute IMHO. Holds more through corners and doesn't tramp. One thing to keep in mind is I have it set as high as it goes. You'd have to order taller shocks to get any more height out of it. Link to comment Share on other sites More sharing options...
Krazy Kyle Get It To Wheelspin Uncontrolably Then Give It Another 5 Pounds Cruise Control 2,697 Member For: 14y 1m 8d Gender: Male Location: Work Posted 17/04/16 10:20 AM Share Posted 17/04/16 10:20 AM I plan on keeping it for a long time. I dont have any problem with tramp but I dont have much trust in the rear end for traction. Looks like a good setup, got me interested in it. Just need to weigh up cost vs gain Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 6d Gender: Male Location: Perth Posted 17/04/16 10:22 AM Share Posted 17/04/16 10:22 AM Do it! I'll even lend you my hoist,help you fit it and supply beer 6 Link to comment Share on other sites More sharing options...
Krazy Kyle Get It To Wheelspin Uncontrolably Then Give It Another 5 Pounds Cruise Control 2,697 Member For: 14y 1m 8d Gender: Male Location: Work Posted 17/04/16 10:26 AM Share Posted 17/04/16 10:26 AM It would have been my first phonecall after ordering it :)..... It looks like a great setup..... give me 6 months Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 6d Gender: Male Location: Perth Posted 17/04/16 10:29 AM Share Posted 17/04/16 10:29 AM I've been daydreaming about tracking down the old thurple money pit and buying bit back as a hand me down for my youngest. That rear end setup would be my first mod if I did. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now