JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 14d Gender: Male Location: Adelaide Posted 19/11/15 10:17 PM Share Posted 19/11/15 10:17 PM Replace just one worn clutch plate .....Shakes head Ever seen a fine tolerance auto been built before phil ?It's a very detailed and intricate process, not all rebuild are equal ! 1 Link to comment Share on other sites More sharing options...
Lennox Member 2,586 Member For: 11y 8m 19d Gender: Male Location: Perth Posted 19/11/15 10:56 PM Share Posted 19/11/15 10:56 PM Who are you getting those quotes from??? I had mine beefed up and upgraded input shaft installed for 2500 bucks.Where'd you get that done and how's it go? Any warranty provided? Monsta torque will do it for 4.5k with a year warranty from memory 1 Link to comment Share on other sites More sharing options...
turboknapp Donating Members 783 Member For: 17y 7m 22d Gender: Male Location: perth w.a Posted 20/11/15 01:04 AM Share Posted 20/11/15 01:04 AM It was built by MT, but that was some time ago. I knew I was pushing power through it, so it was built with only 20,000km on it. Put an upgraded input shaft and extra clutch plates and disks in 2,3 and 4 rotating housings so application pressure can be increased Ive since sold the ute, but from what I hear its still going strong. 1 Link to comment Share on other sites More sharing options...
Lennox Member 2,586 Member For: 11y 8m 19d Gender: Male Location: Perth Posted 20/11/15 01:11 AM Share Posted 20/11/15 01:11 AM Yeh much more now. 3.5k to standard spec iirc 4.5k upgraded 1 Link to comment Share on other sites More sharing options...
turboknapp Donating Members 783 Member For: 17y 7m 22d Gender: Male Location: perth w.a Posted 20/11/15 01:17 AM Share Posted 20/11/15 01:17 AM Mining inflation haha 2 Link to comment Share on other sites More sharing options...
FiftyOne Bronze Donating Members 1,145 Member For: 11y 4m 13d Gender: Male Posted 20/11/15 07:21 AM Share Posted 20/11/15 07:21 AM What I can't figure out is why it is that ZFs are so easy to rebuild, and yet so expensive.If I could get it done cheap enough then I'd get the old transmission rebuilt. Parts are easy enough to get, either from the US or Motospecs ( http://www.motospecs.com.au). The labour component doesn't seem to be huge... the parts don't cost millions... why does it cost four grand for a decent rebuild?$60 a litre for 20L of genuine fluid. Yes there are cheaper options out there 1 Link to comment Share on other sites More sharing options...
PhilMeUp Member 1,045 Member For: 16y 3m 29d Gender: Male Location: Perth, Western Australia Posted 20/11/15 08:29 AM Author Share Posted 20/11/15 08:29 AM $60 a litre for 20L of genuine fluid. Yes there are cheaper options out thereThat's the one part that I've got covered for the right price. 20L drum of Gulf Western Syn-TS for $125.I found Lifeguard for $30/litre, but the Gulf Western has a good reputation on various forums.---------------------------------News back from transmission guy: torque converter is stuffed, $800 to recondition it.Going to spend a day or two trying to find a good turbo transmission and converter. Will resell the one that I bought yesterday (for a profit). Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 1m 22d Gender: Male Location: Perth Posted 20/11/15 08:57 AM Share Posted 20/11/15 08:57 AM Why dick around with a second hand convertor of unknown history when a stock convertor rebuild is well under $500 Link to comment Share on other sites More sharing options...
turboknapp Donating Members 783 Member For: 17y 7m 22d Gender: Male Location: perth w.a Posted 20/11/15 08:58 AM Share Posted 20/11/15 08:58 AM Just like the blue ute ? Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 1m 22d Gender: Male Location: Perth Posted 20/11/15 09:04 AM Share Posted 20/11/15 09:04 AM Call Simon at All fast Torque Convertor in Malaga. Tell him your Tocchis mate and he'll look after you on price. #1 reason for to failure is water contamination in the oil so you might want to get checked out before you proceed. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now