barnz Member 3,047 Member For: 11y 1m Gender: Male Location: Brisbane Posted 14/08/15 12:15 AM Share Posted 14/08/15 12:15 AM (edited) I agree with what you have said keif but fark you say some rando sh*t sometimes. What aftermarket components create more ground clearance on a falcon lol, whilst maintaining stock height or even moar low. Coz I'd be interested in these parts Edited 14/08/15 12:16 AM by barnz Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,042 Member For: 16y 8m 10d Gender: Male Location: Melbourne Posted 14/08/15 12:17 AM Share Posted 14/08/15 12:17 AM It was an overall statement. There may not be any easy method to do this with Falcon's, but there's plenty of other makes/models Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 27d Gender: Male Location: Perth Posted 14/08/15 12:44 AM Share Posted 14/08/15 12:44 AM It's all about the 5 gas test. Modify the exhaust in any way and the car needs to pass a 5 gas test - it will fail with the aftermarket cat. I need to avoid the 5 gas test by putting on a standard dump pipe and cat for the rego inspection. Hence my suggestion to do so. You'll also need stock injectors and injector values and fuel maps plugged back in if you want to guarantee a pass, plus you'll need to tone the boost down as they may run it into boost when they run it up. Link to comment Share on other sites More sharing options...
FiftyOne Bronze Donating Members 1,145 Member For: 11y 5m 19d Gender: Male Posted 14/08/15 11:11 AM Share Posted 14/08/15 11:11 AM Maybe stock maps, but if the injectors are ok, leaving the old values in there should be fine. But we are talking actually getting in & making a new tune almost anyway Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 27d Gender: Male Location: Perth Posted 14/08/15 01:06 PM Share Posted 14/08/15 01:06 PM Time/Effort to swap injectors < Time/Effort/Cost of a repeat 5 gas test Link to comment Share on other sites More sharing options...
FiftyOne Bronze Donating Members 1,145 Member For: 11y 5m 19d Gender: Male Posted 14/08/15 02:56 PM Share Posted 14/08/15 02:56 PM Touché. Fair point Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 23d Gender: Male Location: Perth Posted 14/08/15 04:23 PM Share Posted 14/08/15 04:23 PM Whats the go with the pits now. In 2011 the Nizpro car went straight over AS IS. And they dont come much more modified than that. Link to comment Share on other sites More sharing options...
PhilMeUp Member 1,045 Member For: 16y 5m 4d Gender: Male Location: Perth, Western Australia Posted 14/08/15 06:43 PM Author Share Posted 14/08/15 06:43 PM Whats the go with the pits now. In 2011 the Nizpro car went straight over AS IS. And they dont come much more modified than that.Any modification to the exhaust system requires a 5-gas test. Most stuff in the engine bay is just a matter of paperwork (eg pod filter). The engineer isn't sure if the Plazmaman intake will require more than paperwork (ie 5-gas test). If the Nizpro car had a non-standard dump pipe, cat and mufflers then it should have gone through a 5-gas test. Sounds like they might have found someone who turned a blind-eye?Plenty of dodgy inspections were going on a few years ago, but Dept of Transport got onto it and kicked various arses. All vehicles that were inspected by certain people were then recalled to be re-inspected by someone else.Maybe I'll have to go through a country drive one afternoon through some country towns and see if I can find someone who's not as fussed as Perth workshops. Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 23d Gender: Male Location: Perth Posted 15/08/15 01:48 AM Share Posted 15/08/15 01:48 AM I was there. It was fully inspected by a Perth pit at oconnor . All I did was take the 9.5 inch rear rims off. Sucks you have to go through so much effort Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 27d Gender: Male Location: Perth Posted 15/08/15 02:00 AM Share Posted 15/08/15 02:00 AM Times have changed since 2011 arron Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now