Bizkets is Drunk? Too heavy needs boost Member 5,929 Member For: 11y 6m 16d Gender: Male Location: Adelaide Posted 10/04/15 04:38 AM Share Posted 10/04/15 04:38 AM So I dont know what the problem is. Passenger rear window was working fine yesterday but now it will not go down.Tried both drivers and rear door window switch but it seems like there is no power. Drivers side still works fine and the fuse is fine. Can not hear any noise of the window actuator working but when you use the button to put it up you can hear a slight noise like when your window reaches the stopping point.No downwards movement. Any ideas?Have replaced window actuators in a ba before but normally you hear them when they fark up. Dont know where to look next.Any ideas would help.Cheers. Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,248 Member For: 16y 10m 12d Gender: Male Location: Melbourne Posted 10/04/15 05:11 AM Share Posted 10/04/15 05:11 AM your best bet would be to pull the door trim off and make sure the switch is actually making the actuator move (at all)If it's not moving at all then trace the wire back to the main switch point to make sure there's no bad connection - this would be unlikely, I would have thought.If it's moving a little but stopping straight away it could be not getting quite enough current to make the motor move - this could be due to a bad contact somewhere either on the switch or wiring pathway.If it's moving freely then it could be not connected correctly somewhere to the window movement mechanism.If it's not working at all you can try a motor from the other side to see if it's the motor or the wiring...Sorry that's not really helpful, but it'll require some manual diagnosis - may be just easier to take it straight to an auto elec. Link to comment Share on other sites More sharing options...
Wilko16 Donating Members 1,672 Member For: 17y 3m 1d Gender: Male Location: Melbourne Posted 10/04/15 05:24 AM Share Posted 10/04/15 05:24 AM Swap the switches left to right I'm not sure how the FG window switches work but on my AU it used to just get dirty contacts (carbon build up)Pulled them apart, little bit of sandpaper and they come good for a year or two Link to comment Share on other sites More sharing options...
Bizkets is Drunk? Too heavy needs boost Member 5,929 Member For: 11y 6m 16d Gender: Male Location: Adelaide Posted 10/04/15 06:21 AM Author Share Posted 10/04/15 06:21 AM Must be a lose wire or just stuck. Slamed the door when I put my work bag in and what do ya know. It works again. Ill pop the door trim sat arvo and check the wires and give it a clean. Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,248 Member For: 16y 10m 12d Gender: Male Location: Melbourne Posted 10/04/15 06:22 AM Share Posted 10/04/15 06:22 AM Link to comment Share on other sites More sharing options...
BenDoCo I'm getten too old for this s**t Bronze Donating Members 4,509 Member For: 11y 10m 15d Gender: Male Location: A big bridge over a river in South Australia Posted 10/04/15 08:20 AM Share Posted 10/04/15 08:20 AM That'll stop jnr hangen out da window......wait.....his seat is in the middle isn't it? 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now