Wilko16 Donating Members 1,672 Member For: 16y 11m 14d Gender: Male Location: Melbourne Posted 05/04/15 09:38 AM Share Posted 05/04/15 09:38 AM My bad... Wastegate solinoid is what I meant Link to comment Share on other sites More sharing options...
xr6tewww New Member 8 Member For: 9y 8m 3d Gender: Male Location: brisbane Posted 05/04/15 09:44 AM Author Share Posted 05/04/15 09:44 AM (edited) will suss out the wastegate tomorrow Edited 05/04/15 09:48 AM by xr6tewww Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 5m 10d Gender: Male Location: NOR Perth Posted 05/04/15 10:17 AM Share Posted 05/04/15 10:17 AM And a bottle of this (or similar): http://www.wynns.net/product/I/complete-fuel-system-cleaner-petrol Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 5m 8d Gender: Male Location: @ my laptop Posted 05/04/15 10:28 AM Share Posted 05/04/15 10:28 AM your turbo and manifold bolts really should be checked as part of any servicing Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 5m 10d Gender: Male Location: NOR Perth Posted 05/04/15 10:54 AM Share Posted 05/04/15 10:54 AM Are both turbo and manifold bolts supposed to be torqued to same amount? Do you happen to know that figure off the top of your head ratter? Link to comment Share on other sites More sharing options...
Skids4kids in the mid....not the bum like some Member 609 Member For: 11y 6m 12d Gender: Male Posted 05/04/15 11:32 AM Share Posted 05/04/15 11:32 AM (edited) 27nm for exhaust.20nm for manifold and use a medium strength thread-lock.16nm for the 2 piece B series inlet manifold top section to lower. Edited 05/04/15 11:33 AM by Skids4kids Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 5m 10d Gender: Male Location: NOR Perth Posted 05/04/15 01:19 PM Share Posted 05/04/15 01:19 PM Is that all? Wtf...thought it would have been tighter than that So for FG the dump to turbo bolts are 27nm and exhaust manifold 20nm.Cheers! Link to comment Share on other sites More sharing options...
Z2TT Member 714 Member For: 12y 5m 9d Posted 05/04/15 02:34 PM Share Posted 05/04/15 02:34 PM Why do you have to tighten manifold bolts I have never heard the need to do this on any car except Falcon.Is it inlet manifold or exhaust, the service manual only mentions intake. Link to comment Share on other sites More sharing options...
rokkie Member 87 Member For: 12y 1m 16d Gender: Male Location: Adelaide, SA Posted 05/04/15 10:56 PM Share Posted 05/04/15 10:56 PM Fg is inlet only (I have found fg exhuast bolts loose though)B series is both according to the manual Link to comment Share on other sites More sharing options...
xr6tewww New Member 8 Member For: 9y 8m 3d Gender: Male Location: brisbane Posted 08/04/15 11:36 AM Author Share Posted 08/04/15 11:36 AM all good everybody, mechanic put the wrong oil in. (good oil but car just didn't like it) back to its normal self again Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now