Billet Wheel For Fg Gt3576R

[wagondad]

Does any one do a billet wheel for the GT3576R FG turbo. I have been searching and cant find anything. Am I looking for the the right part, Inducer 53mm, Major 76mm to suit the T04E .50A/R Compressor cover ? I can find standard replacement wheels but not a performance billet.

[Boosted1]

Look up KTS and their compressor catalogue, thousands to choose from and what your looking for is on there.

make sure you get the right bore size to match the gt35 turbine wheel shaft

[Bellato]

As mentioned KTS. Otherwise Kinugawa do one too I think. Shops like precision turbos in Sydney supply and fit one, not sure what brand they use though

[wagondad]

Thanks Boosted1, Had a look at KTS , found a few for the GT3576 most are for Isuzu diesels which use larger inducer size 56.8mm, 75mm, one was listed as performance so I have sent an E-mail with as much info as I can and will wait for a reply.

[wagondad]

Found this on ebay, Picture shows a 6+6 cast compressor wheel. eBay item number:381207607446

Kinugawa Garrett T3/T4 T04E Turbo Compressor Wheel 53.mm /76.2mm / 50 Trim / 448048-04

Garrett T3/T4/T04B/T04E 50 Trim

- Inducer Diameter : 53mm / 2.087

- Exducer Diameter : 76.2 / 3"

- Tip: 5.2mm / 0.2"

- Trim : 50

- Total Height : 37.5mm / 1.48”

- Bore Diameter: 6.3mm / 0.248”