Jump to content

Am I Gunna Get There


Recommended Posts

  • Donating Members
  • Member For: 11y 6m 26d
  • Gender: Male
  • Location: NOR Perth

^^^ OMG so many lols.

process west serge with single 460

DBA T2 brakes (paid only $280 of face book brand new )front and back with red stuff pads (ordered bendix pads but they got me those ?)

A little back on topic....I got a second hand surge with single 044. Apparently the rubber hose that goes from the surge to the pump is prone to cracking. Mine was used for 30,000kms on 98 and has a sh*t load of small cracks/splits.

Tuner told me to replace to braided lines (and fittings to suit)....otherwise it will keep happening. Anyone else running braided line here? (quoted $240 for parts + install).

As for t2 brakes....that wasn't front and back for $280? Cause that's bloody cheap if so. Some other dude just posted in my brake rotor thread that he had issues with returning shudder from using t3s and red stuff. Not sure if he's a one off; cause thought people usually had good experiences with said pad.

Link to comment
Share on other sites

  • Member
  • Member For: 11y 1m 1d
  • Gender: Male
  • Location: Brisbane

Gunna, go to Coles and buy a 99 dollar android phone fark sake. Then download tapatalk. Easy. Its not 1995.

Fg dump required if using the fg manifold, turbo sits in a slightly different spot.

Send the ebc reds back, they are average at best... get pmu ns400's

Replace the poxy fg throttle body elbow with a good one whilst doing coldside tweaks

Stall speed seems spot on, but dem diff gears you have....I'd go back to stock, I'd bet you will pick up a bit more spool..

Good to see you posting updates

Do a skid

Edited by barnz
Link to comment
Share on other sites

  • Member
  • Member For: 10y 10m 23d
  • Gender: Male
  • Location: near brisbane

ptr ,a guy bought them and sold his car .so I picked them up cheap .

Barnz ,I have a FG dump spot on there .yes the turbo sits about 30 mm back further and the engine mount would be in the way if I would run it the same as the BA hot side

  • Like 1
Link to comment
Share on other sites

  • Member
  • Member For: 11y 1m 1d
  • Gender: Male
  • Location: Brisbane

Awesome mate seems like things are progressing well. Will be a beast!

Now, go buy a smartphone lol, they are actually really easy to use. Just a cheapie will be all you need

  • Like 2
Link to comment
Share on other sites

  • www.australianflag.org.au
  • Donating Members
  • Member For: 19y 5m 5d
  • Gender: Male
  • Location: Brisbane

ptr ,a guy bought them and sold his car .so I picked them up cheap .

Barnz ,I have a FG dump spot on there .yes the turbo sits about 30 mm back further and the engine mount would be in the way if I would run it the same as the BA hot side

Pics

  • Like 1
Link to comment
Share on other sites

  • Member
  • Member For: 10y 10m 23d
  • Gender: Male
  • Location: near brisbane

will buy a phone tomorrow ,just taking the ba engine apart .so far engine looks like brand new ,all the rollers are mint compared to the fg ones .only got to take the sump off that is it

Link to comment
Share on other sites

  • Member
  • Member For: 11y 1m 1d
  • Gender: Male
  • Location: Brisbane

Lol if he gets a cheap android device and crapatalk he can snap them and upload easily.

So I'm going to remain optimistic

Edited by barnz
  • Like 1
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'