JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 8m 23d Gender: Male Location: Adelaide Posted 20/03/15 09:02 AM Share Posted 20/03/15 09:02 AM Yes barnz of course we did ............Also used a clipsal RCD as a safety cut off .......Gunna , relax take a breath Those bosch 1000cc injectors you bought with your last round of raping, cough I mean mods are 100% useable with this FG engine You can buy little spacers to lift the FG rail up 8-10mm Everyone used B series injectors early on for FG so its no biggy, done plenty of the b series length injectors into FG's so do not buy more injectors just buy the spacers.... Or x6-7 5mm washers for each locating bolt ..... Same/same 1 Link to comment Share on other sites More sharing options...
barnz Member 3,047 Member For: 11y 3m 3d Gender: Male Location: Brisbane Posted 20/03/15 09:31 AM Share Posted 20/03/15 09:31 AM Wrong again, then you need a cumbersome earth strap.If it was me I would have just slapped one of these babies on the dash in surface conduit. 1 Link to comment Share on other sites More sharing options...
Bizkets is Drunk? Too heavy needs boost Member 5,929 Member For: 11y 6m 17d Gender: Male Location: Adelaide Posted 20/03/15 09:33 AM Share Posted 20/03/15 09:33 AM Dont forget to glue the bellends 2 Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 8m 23d Gender: Male Location: Adelaide Posted 20/03/15 09:46 AM Share Posted 20/03/15 09:46 AM I see everyones an electrician in here ..........Want a job ? Dollar dave @ Keep Paying Money and I are besties now Link to comment Share on other sites More sharing options...
barnz Member 3,047 Member For: 11y 3m 3d Gender: Male Location: Brisbane Posted 20/03/15 09:51 AM Share Posted 20/03/15 09:51 AM Why? He has enough muppets. I couldn't possibly meet his high standards anyway.... Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 8m 23d Gender: Male Location: Adelaide Posted 20/03/15 09:53 AM Share Posted 20/03/15 09:53 AM Yeh might have to break out the porcelain connector blocks next It's what they use on the V8SC series......... 1 Link to comment Share on other sites More sharing options...
barnz Member 3,047 Member For: 11y 3m 3d Gender: Male Location: Brisbane Posted 20/03/15 10:28 AM Share Posted 20/03/15 10:28 AM Lol I was gonna keep going but im all out of bullsh*t 1 Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 11y 26d Gender: Male Location: near brisbane Posted 22/03/15 02:34 AM Author Share Posted 22/03/15 02:34 AM send another reminder to Jamie about the parts and price of the parts I will need for my project . if I still get no answer from him by the end of the week I will move on to another tuner . he is one of the best but so would be disappointed if he is not interested in doing the job . I just do not want to wait much longer for a reply . Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 8m 23d Gender: Male Location: Adelaide Posted 22/03/15 03:06 AM Share Posted 22/03/15 03:06 AM Good tuners are busy mate and it will pay dividends for you to have patience because once he's onto your car it will receive the same dedication that he is obviously giving to a current car/build Just relax 1 Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 11y 26d Gender: Male Location: near brisbane Posted 22/03/15 03:15 AM Author Share Posted 22/03/15 03:15 AM that is true Link to comment Share on other sites More sharing options...
Recommended Posts