tuff New Member 5 Member For: 10y 2m 25d Posted 06/03/15 01:45 AM Share Posted 06/03/15 01:45 AM Hi guys, a quick question for you...What's max hp you think a single impco 425 will support in blowthru config?Got an EGAS ba wagon I'm dropping a turbo fg motor in on straight gas and rather than going full injected vapour lpg, was exploring possibility of going blowthru carby and just tune factory ecu for ignition for boost.Due to the fly by wire my gas research mixer is not happening so figured impco is next best bet.Chasing 350rwkw so probably way out of its league. Any thoughts Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 9m 10d Gender: Male Location: Adelaide Posted 06/03/15 01:56 AM Share Posted 06/03/15 01:56 AM Mick is king dingaling with turbo gas systems but I would be going with technology and injecting it vs blowing it throughIirc one reg will get you to the 280rwkw mark Link to comment Share on other sites More sharing options...
barnz Member 3,047 Member For: 11y 3m 21d Gender: Male Location: Brisbane Posted 06/03/15 02:02 AM Share Posted 06/03/15 02:02 AM (edited) BLOS LPG mixers are the go if you have a complex converter(positive feed) I have 2 on a 5.0 windsor, makes the same power as it does on petrol. Economy is alot better than a simple mixer ring as the BLOS is a variable mixer. One is enough for 200hp N/A but im sure it would make more with boost being shoved through it. They are also well suited to turbo applications and wont require any modification. Not sure about the impco but I can see how a traditional mixer ring may not be suited to a boosted application.Dont know much about gas research converter but I know the omvl one I have is only good to about 400hp and its the biggest they make. Any more and I guess you need 2?Also another thought, with the way lpg pricing is going is it all really worth it, im finding im only marginally better off atm, glad I didn't pay for the conversion...Another thing, all systems must be closed loop these days for emissions, and stepper motors are gay, this is where an injection system is much better as most of the time your not in open loop(over 3500rpm...ish), mine feels alot better response wise without the stepper motor as the blos carbies dont need it...bit its not legal(I have taken the piston out od the stepper....shhhh looks legit...) Edited 06/03/15 02:14 AM by barnz Link to comment Share on other sites More sharing options...
tuff New Member 5 Member For: 10y 2m 25d Posted 06/03/15 03:27 AM Author Share Posted 06/03/15 03:27 AM (edited) That blos sounds good, are they any harder than iMpco and gra to setup and tune? I'd like vapour injection but at around $3000 for supply and tune, then.me doing all the fitting, it's just ridiculous when I have a gra setup in the garage that is capable of big hp. Any idea who.has the blos.mixers? Never heard of them before. This setup might be a lot easier than I thought Edited 06/03/15 03:28 AM by tuff Link to comment Share on other sites More sharing options...
tuff New Member 5 Member For: 10y 2m 25d Posted 06/03/15 03:31 AM Author Share Posted 06/03/15 03:31 AM Oh sh*t, that's a simple mixer type, hard to get the flow for decent hp out of them... Might be harder to stuff around with Link to comment Share on other sites More sharing options...
barnz Member 3,047 Member For: 11y 3m 21d Gender: Male Location: Brisbane Posted 06/03/15 03:42 AM Share Posted 06/03/15 03:42 AM I got mine from Poland, they were fairly simple to setup, I just road tuned mine using a narrowband lol...far from ideal...Mind you im only making like 250hp...id imagine the complex converters are the problem for big hp applications? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now