gaz097 Bronze Donating Members 1,752 Member For: 13y 5m 22d Posted 04/03/15 04:08 AM Share Posted 04/03/15 04:08 AM Just curious to where everyone makes there peak power compared to rpm. Always a lot of talk about power vs boost but rpm is never factored. I'll shoot first 460kw at 4300 rpm. Link to comment Share on other sites More sharing options...
Wilko16 Donating Members 1,672 Member For: 17y 1m 22d Gender: Male Location: Melbourne Posted 04/03/15 09:24 AM Share Posted 04/03/15 09:24 AM (edited) 305kw at 5000rpm Edited 04/03/15 09:32 AM by Wilko16 Link to comment Share on other sites More sharing options...
camo86T Silver Donating Members 1,810 Member For: 10y 11m Gender: Male Location: SW Sydney Posted 04/03/15 09:32 AM Share Posted 04/03/15 09:32 AM 357rwkw @ 5970 Link to comment Share on other sites More sharing options...
Bizkets is Drunk? Too heavy needs boost Member 5,929 Member For: 11y 5m 6d Gender: Male Location: Adelaide Posted 04/03/15 09:51 AM Share Posted 04/03/15 09:51 AM 350@ 5000rpm only climbs to 359@ 5900 good peak through the last 1000rpm. sh*t tune still. Link to comment Share on other sites More sharing options...
rokkie Member 87 Member For: 12y 3m 23d Gender: Male Location: Adelaide, SA Posted 04/03/15 09:51 AM Share Posted 04/03/15 09:51 AM 302rwkw at 5350rpm Link to comment Share on other sites More sharing options...
BenDoCo I'm getten too old for this s**t Bronze Donating Members 4,509 Member For: 11y 9m 5d Gender: Male Location: A big bridge over a river in South Australia Posted 04/03/15 11:37 AM Share Posted 04/03/15 11:37 AM 319 @ 162kph - 4550 on a Mainline Link to comment Share on other sites More sharing options...
jaba010 New Member 16 Member For: 11y 2m 24d Posted 04/03/15 09:33 PM Share Posted 04/03/15 09:33 PM 312@5220 Link to comment Share on other sites More sharing options...
rollex Member 683 Member For: 10y 7m 4d Gender: Male Location: Australia Posted 05/03/15 04:50 AM Share Posted 05/03/15 04:50 AM (edited) 319rwkw @ 5475 rpmIgnore the figure below, that is their "flywheel" figure, the actual figure is only 319 Edited 05/03/15 04:51 AM by rollex Link to comment Share on other sites More sharing options...
gaz097 Bronze Donating Members 1,752 Member For: 13y 5m 22d Posted 05/03/15 07:14 AM Author Share Posted 05/03/15 07:14 AM Everyone's rpm is a lot higher then mine. Guess I have some flow issues up high. Link to comment Share on other sites More sharing options...
rollex Member 683 Member For: 10y 7m 4d Gender: Male Location: Australia Posted 05/03/15 07:54 AM Share Posted 05/03/15 07:54 AM (edited) Everyone's rpm is a lot higher then mine. Guess I have some flow issues up high.Not necessarily, you are making 460rwkw, you would still be making way more power than any of us at 6k, eg you are flowing fine. The reason you are making peak power lower is because you are reaching the max flow of the head/cams/turbo so it is choking up top, it is still flow very well up top though.If your power was 350kw etc I might comment that it was just your boost curve is poor and dropping off in the top end, but 460kw is definitely going to be stretching the flow limits of everything so it sounds normal.edit: If you overlayed your dyno curve with ours you will see what I mean, your power in the high revs will still be very high, you are just making sh*tloads more torque (probably lots of boost) hence the low figure. What turbo are you running? Edited 05/03/15 07:55 AM by rollex Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now