LU82 Bronze Donating Members 569 Member For: 11y 10m 5d Posted 06/03/15 04:58 AM Share Posted 06/03/15 04:58 AM Any luck fixing the issues?? Link to comment Share on other sites More sharing options...
trumpy955 Member 183 Member For: 16y 28d Gender: Male Location: Gladstone Queensland Posted 06/03/15 06:13 AM Share Posted 06/03/15 06:13 AM Have to admit, im surprised it was cnv. They did my ba a few years back and it was awesome. I hadnt heard anything bad about them before (I have been away for 4 years though so anything is possible) hope its all good now mate. Link to comment Share on other sites More sharing options...
delacruz_xr6t Member 26 Member For: 11y 8m 7d Gender: Male Location: sydney Posted 06/03/15 05:05 PM Author Share Posted 06/03/15 05:05 PM (edited) Nah I havent had time to see mechanic.. going to take it on on monday... keep u guys updated Edited 06/03/15 05:06 PM by delacruz_xr6t Link to comment Share on other sites More sharing options...
delacruz_xr6t Member 26 Member For: 11y 8m 7d Gender: Male Location: sydney Posted 10/03/15 12:44 AM Author Share Posted 10/03/15 12:44 AM Next week going to put in valve springs and coils... any ideas what valve springs to buy... crow cam, plazmaman?Do I need to but the retainers? Link to comment Share on other sites More sharing options...
camo86T Silver Donating Members 1,810 Member For: 10y 9m 18d Gender: Male Location: SW Sydney Posted 10/03/15 02:34 AM Share Posted 10/03/15 02:34 AM CMS supplied me with plazmamanApparently original retainers are fine 1 Link to comment Share on other sites More sharing options...
delacruz_xr6t Member 26 Member For: 11y 8m 7d Gender: Male Location: sydney Posted 10/03/15 02:38 AM Author Share Posted 10/03/15 02:38 AM CMS supplied me with plazmamanApparently original retainers are fineHow much did they charge you? Link to comment Share on other sites More sharing options...
chris_richo Member 8 Member For: 14y 2m 25d Gender: Male Location: port macquarie Posted 10/03/15 07:14 AM Share Posted 10/03/15 07:14 AM I had my ba ute tuned at cv around 2yrs ago. first time it came out running 308kw @ 19psi and had a bad idle. took the car back and they lowered the boost to 15psi which raised the power to 325kw and said there's a problem with plugs or coils. Had a look myself turned out to be a huge air leak on the intake manifold. Got a new tuner now 1 Link to comment Share on other sites More sharing options...
trumpy955 Member 183 Member For: 16y 28d Gender: Male Location: Gladstone Queensland Posted 11/03/15 10:33 AM Share Posted 11/03/15 10:33 AM Mine was 10lbs and 291rwkw and I said no more than 280 (4 speed auto) they said they couldnt get it any lower.. 1 Link to comment Share on other sites More sharing options...
camo86T Silver Donating Members 1,810 Member For: 10y 9m 18d Gender: Male Location: SW Sydney Posted 11/03/15 09:13 PM Share Posted 11/03/15 09:13 PM How much did they charge you?Have to check the invoice, but from memory they were $800-850 fitted 1 Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 1m 10d Posted 11/03/15 10:02 PM Share Posted 11/03/15 10:02 PM Tuner should start with the tune and go over it to make sure anything is okay, then they should be able to diagnose the issue, whether it be plugs, coils, valve springs etc.Also I'm no expert but if valve springs are starting to hurt, im under the impression you could actually just put a decent exhaust on instead and free up exhaust flow and that will take some pressure off the valve springs and they might be okay. Plus you will make more power with it 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now