Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 19d Gender: Male Location: Perth Posted 26/02/15 02:21 AM Share Posted 26/02/15 02:21 AM Around 12lb should see your power figure, I'd be expecting 330rwkw(ish) on 15lb. Are you tuning it yourself or using the HPT gear purely as a remote interface for your tuner?If you're tuning it yourself jump on the HPT forum as well. Link to comment Share on other sites More sharing options...
camo86T Silver Donating Members 1,810 Member For: 10y 10m 30d Gender: Male Location: SW Sydney Posted 26/02/15 02:31 AM Share Posted 26/02/15 02:31 AM Nice thread bud! Link to comment Share on other sites More sharing options...
timwds Member 54 Member For: 12y 11m 23d Gender: Male Location: Tamworth Posted 26/02/15 03:12 AM Share Posted 26/02/15 03:12 AM (edited) Around 12lb should see your power figure, I'd be expecting 330rwkw(ish) on 15lb. Are you tuning it yourself or using the HPT gear purely as a remote interface for your tuner?If you're tuning it yourself jump on the HPT forum as well.Hi Ralph,I'm the Tim that did the tuning.I do agree it's a bit short for that boost level. From memory it made 298kW at 12PSI. We had just raised the boost which made the 309 before running out of time. At that boost I could also heard audible signs of valve float up top, hence dropping it back.Hoping to sort out some new valve springs, go back and add some timing to that load level. This has been a big education for both of us so we're happy with baby steps and learn along the way.I'm on the HPT forums as well, they've been very helpful throughout out the journey.Thanks for your feedback Edited 26/02/15 03:14 AM by timwds 1 Link to comment Share on other sites More sharing options...
IT15ON Donating Members 83 Member For: 13y 8d Gender: Male Location: Newcastle Posted 26/02/15 03:13 AM Author Share Posted 26/02/15 03:13 AM (edited) Around 12lb should see your power figure, I'd be expecting 330rwkw(ish) on 15lb. Are you tuning it yourself or using the HPT gear purely as a remote interface for your tuner?If you're tuning it yourself jump on the HPT forum as well.It is being tuned by my mate as a first time tuning sort of thing. So basically a home tune job using HPT, learning along the way. I am the lucky guinea pig there is no professional tuner involved..Big thanks to Tim for his hard work too!What do you think about the BOV? I've heard of guys running lots more power than me on a stock bov and that it should be fairly quiet? Edited 26/02/15 03:20 AM by IT15ON Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 19d Gender: Male Location: Perth Posted 26/02/15 05:37 AM Share Posted 26/02/15 05:37 AM Hi Ralph,I'm the Tim that did the tuning.I do agree it's a bit short for that boost level. From memory it made 298kW at 12PSI. We had just raised the boost which made the 309 before running out of time. At that boost I could also heard audible signs of valve float up top, hence dropping it back.Hoping to sort out some new valve springs, go back and add some timing to that load level. This has been a big education for both of us so we're happy with baby steps and learn along the way.I'm on the HPT forums as well, they've been very helpful throughout out the journey.Thanks for your feedbackMy username over on the hpt forum is Hiddeous,i do recall you posting. I didn't realise it had stock springs power to boost level makes sense then. Get some springs in it stat! 1 Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 7m 11d Gender: Male Location: Adelaide Posted 26/02/15 05:55 AM Share Posted 26/02/15 05:55 AM Moar boost, work past the float until they bounce againBit like a double skip with the old jump roap hahahaha 1 Link to comment Share on other sites More sharing options...
IT15ON Donating Members 83 Member For: 13y 8d Gender: Male Location: Newcastle Posted 26/02/15 06:48 AM Author Share Posted 26/02/15 06:48 AM Moar boost, work past the float until they bounce againBit like a double skip with the old jump roap hahahahaI see what you are getting at there, so I should sort of double my power if I push say 25psi through/past those springs while compressed? My username over on the hpt forum is Hiddeous,I do recall you posting.I didn't realise it had stock springs power to boost level makes sense then. Get some springs in it stat!I am very keen for the springs, they are pretty cheap too - but the tool to fit them while in car is the expensive bit! Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 19d Gender: Male Location: Perth Posted 26/02/15 09:03 AM Share Posted 26/02/15 09:03 AM You can rent the tooling from atomic Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,128 Member For: 16y 9m 1d Gender: Male Location: Melbourne Posted 27/02/15 02:09 AM Share Posted 27/02/15 02:09 AM great write up! Link to comment Share on other sites More sharing options...
JVK Silver Donating Members 751 Member For: 19y 24d Gender: Male Location: North West Hot Hell,VIC Posted 27/02/15 08:33 AM Share Posted 27/02/15 08:33 AM How much is the tool to rent Luke , Or do you know anyone selling one ? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now