Xr6T Lsd In G6Et

[Liam000]

Hi,

Does anybody know if I can put a xr6t lsd centre in my g6et?

I'm tired of 1 wheelin but can't afford a true trac.

and figured I would be able to get a centre from the wreckers.

would prefer not to have to buy the whole IRS cradle, but have seen them advertised

I also heard that I can shim the g6et diff centre so that it will spin 2 wheels, but I'm concerned this will turn it into a locker (and I don't know how to do it, just heard rumors)

any help would be appreciated.

I think they are both 30 spline axles, but can anyone confirm this?

is the same lsd in xr6t, xr8 and gt?

thanks

[GeGe6]

I'll be surprised if works out that much cheaper, unless doing work yourself.

I rang a diff shop inquiring about putting a XR6 LSD in over Truetrac and it came to about $300 difference!

Interested to hear what people say.

[barnz]

Its a lot cheaper IF you find one at the right price and can do it yourself.

[GeGe6]

When I was pricing it that was supplying XR6 LSD at a cost of $200.

[Liam000]

Ok. So it will fit

I'm happy to do the work myself

Just didn't want to buy one and pull my car apart just to find it won't work

[GUN-808]

It will fit yes..
BUT

a truetrac will always provide MUCH better traction than an LSD..

my diff guy said like 30% lockup compared to 70% with a truetrac.. so theres a big difference..

if your getting it at the "right price" theres a chance its funked already or will be real soon.. SO

my advice if your set on buying it id rebuild it at a minimum BEFORE you install it as once u have done a RnR on the cradle

your not gunna wanna take on that job anytime soonly if u dont have access to a hoist or have the patience to do it again soon..

probably do your diff bushes while your there and have the cradle out for above reasons..