JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 6m Gender: Male Location: Adelaide Posted 11/02/15 09:19 AM Share Posted 11/02/15 09:19 AM (edited) Well it is actually x3 pipes for the hot side but I should of said chrome or stainless colour But look from the pik you got it on Yes ditch the bov for the time being In your last pik use that black silicone 45 to join that pipe work up In all honesty they look like the wrong pipes ( two silver ones on cold side ) but if it works go for itUll need to push the blue silicone 45 from the cooler in towards the radiator area then stuff more of the pipes into the silicones and make sure that area where the black straight joiner is is away from the side of the car or the bumper will NOT fit on So tuck it all in and towards the engine area Edited 11/02/15 09:22 AM by Butt Plug Link to comment Share on other sites More sharing options...
hawlass Silver Donating Members 1,161 Member For: 17y 22d Gender: Male Location: left right out Posted 11/02/15 09:35 AM Share Posted 11/02/15 09:35 AM Yep ^WHS^, I trimmed about 10mm off each end of that blue silicone joiner to tuck it in tight.Just noticed the 5mm barb hanging off the bottom of the pipe in that pic- wtf is that for?, I dont have that at all! Link to comment Share on other sites More sharing options...
tab Sucker Moderating Team 32,303 Member For: 20y 7m 6d Gender: Male Location: Brisbane Posted 11/02/15 09:40 AM Share Posted 11/02/15 09:40 AM Well at least you know it's a genuine Rapid kit...half the components are missing. FMD 1 Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 6m Gender: Male Location: Adelaide Posted 11/02/15 09:53 AM Share Posted 11/02/15 09:53 AM (edited) Lol trent Is this effort worth mod status yet or what ?I haven't even taken the piss yet ...... Much Edited 11/02/15 09:54 AM by Butt Plug Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 6m Gender: Male Location: Adelaide Posted 11/02/15 09:56 AM Share Posted 11/02/15 09:56 AM Yep ^WHS^, I trimmed about 10mm off each end of that blue silicone joiner to tuck it in tight.Just noticed the 5mm barb hanging off the bottom of the pipe in that pic- wtf is that for?, I dont have that at all!It connects to the PCV It used to be on the large single piece cold side that goes up to the TB but obviously chris has moved it to under bumper area Link to comment Share on other sites More sharing options...
tab Sucker Moderating Team 32,303 Member For: 20y 7m 6d Gender: Male Location: Brisbane Posted 11/02/15 10:14 AM Share Posted 11/02/15 10:14 AM Straight to admin I think plugger. But then they do sweet fck all so I dunno Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 6m Gender: Male Location: Adelaide Posted 11/02/15 10:16 AM Share Posted 11/02/15 10:16 AM I think I could take it down a notch even further Just sayn Link to comment Share on other sites More sharing options...
ricky Member 39 Member For: 10y 9m 15d Posted 11/02/15 12:27 PM Author Share Posted 11/02/15 12:27 PM (edited) Well it is actually x3 pipes for the hot side but I should of said chrome or stainless colourBut look from the pik you got it onYes ditch the bov for the time beingIn your last pik use that black silicone 45 to join that pipe work upIn all honesty they look like the wrong pipes ( two silver ones on cold side ) but if it works go for itUll need to push the blue silicone 45 from the cooler in towards the radiator area then stuff more of the pipes into the silicones and make sure that area where the black straight joiner is is away from the side of the car or the bumper will NOT fit onSo tuck it all in and towards the engine area.Ive shortened the blue 45 silicon joiner which has wroked well. Im thinking of keeping the stock bov. With the picture of the bov can I block of that other pipe that's hanging of the bov? The little breather that's directly ontop of the bov does this need to be connected or can be blocked also? if I decide to completely ditch the standard bov do I just plug the little breather hose of?Cheers Edited 11/02/15 12:29 PM by ricky Link to comment Share on other sites More sharing options...
ricky Member 39 Member For: 10y 9m 15d Posted 14/02/15 03:49 AM Author Share Posted 14/02/15 03:49 AM (edited) So do people not run parkers with aftermarket intercoolers on the passenger side? Right above the piping in the picture is were the parker light is ment to be. Edited 14/02/15 03:51 AM by ricky Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 6m Gender: Male Location: Adelaide Posted 14/02/15 07:40 AM Share Posted 14/02/15 07:40 AM U can make it fit, trust me its just tight Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now