Jump to content

Need Some Help Deciding. Fpv F6 Or Xr6T


iBilateral

Recommended Posts

  • Member
  • Member For: 11y 5d
  • Gender: Male
  • Location: Brisbane

If its a zf open the coolant expansion tank before you go for a drive and look for signs of gearbox oil. Also be on the look out for any flaring being modded. Try and do some wide open changes if possible.

Rubber in the guards lol

Usual clunks from bushes. Not a deal breaker but may be able to knock the price down a bit.

Worn power window switches, one of my rear ones was farked when I bought it. Didn't even notice.

Outside temp sensor incorrect, another thing I didn't notice.

Make sure the aircon is cold and all works properly(mixer shaft)

Umm not sure what else

Edit: leaks around timing cover, rough idle.

If your really keen take a screw driver so you can remove some piping to check turbo shaft play. Hopefully it already has an after market oil feed and filter or screen removed

Edited by barnz
Link to comment
Share on other sites

  • Member
  • Member For: 10y 7m 6d

If its a zf open the coolant expansion tank before you go for a drive and look for signs of gearbox oil. Also be on the look out for any flaring being modded. Try and do some wide open changes if possible.

Rubber in the guards lol

Usual clunks from bushes. Not a deal breaker but may be able to knock the price down a bit.

Worn power window switches, one of my rear ones was farked when I bought it. Didn't even notice.

Outside temp sensor incorrect, another thing I didn't notice.

Make sure the aircon is cold and all works properly(mixer shaft)

Umm not sure what else

Edit: leaks around timing cover, rough idle.

If your really keen take a screw driver so you can remove some piping to check turbo shaft play. Hopefully it already has an after market oil feed and filter or screen removed

These are his mods that he's done in the past two years so I'm kinda happy.

If he's had it for only two it limits the time he could have thrashed it tbh.

- 20' staggered wheels with Pirelli P Zero rubber, plenty of tread

- Lowered on King Springs

- Rapid Intercooler

- 3.5' X-Force exhaust from turbo back

- Herrod cold air intake

- 80lb Siemens injectors

- SCT 3 tune box

Link to comment
Share on other sites

  • Member
  • Member For: 12y 5m 30d

Your better off to get a XR6 Turbo, will cost you less and for the money you spend you can get a much nicer condition one compared to a worse condition F6.

If you wan't bigger brakes and more power potential to begin then get a F6.

Link to comment
Share on other sites

  • Member
  • Member For: 10y 7m 6d

Your better off to get a XR6 Turbo, will cost you less and for the money you spend you can get a much nicer condition one compared to a worse condition F6.

If you wan't bigger brakes and more power potential to begin then get a F6.

Another reason is because I love the F6's interior and the body kit etc. To me it feels better and doesn't remind me so much of a taxi haha (no offense)

Link to comment
Share on other sites

  • Donating Members
  • Member For: 12y 2m 29d
  • Gender: Male
  • Location: Sydney

Agree with Z2TT.

Expect to pay around 10-15K more for an F6 with same km and year.

For example if I had to sell my car I'd want around 30k. It's 2011, has 40,000km on it. Has had at least 15k spent on it. Brakes, suspension, wheels, power. An extra 15k is a lot.

I would want as new and as low km you can afford.

Edited by Seaton
Link to comment
Share on other sites

  • ...JD TUNING ADELAIDE...
  • Gold Donating Members
  • Member For: 16y 5m 25d
  • Gender: Male
  • Location: Adelaide

Yeh the op asked me yesterday about my car

Hes looking at others now lol

I think gunna should buy it though weeeeee

  • Like 3
Link to comment
Share on other sites

  • I'm getten too old for this s**t
  • Bronze Donating Members
  • Member For: 11y 7m 18d
  • Gender: Male
  • Location: A big bridge over a river in South Australia

Looks like it may have a bit 'o a leak but this one looks like a bargin

184622723.jpg

Wait..................what ???

  • Like 1
Link to comment
Share on other sites

  • Member
  • Member For: 11y 8m 30d
  • Gender: Male
  • Location: Perth

I'd be not worrying about whether it's an f6 or xr6 and just looking for a car that already has all the mods done cos you'll end up doing em anyway and you can save a packet buying it already done

Wish I did this.

Make sure it's all quality parts and done by a well known tuner though

Getting one with a built zf would be awesome cos that's 4 or 5 grand right there

Edited by Lennox
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'