Jump to content

Fg Xr6 Turbo


jacobmitchell92

Recommended Posts

  • 3 months later...
  • Donating Members
  • Member For: 13y 8m 16d
  • Gender: Male
  • Location: Perth

Still haven't managed to race it yet due to work. Took it down a few weeks ago and blew the RH drive shaft. Just picked the car up on Monday with new 1400hp shafts, hubs, CVs and put a new true Trac diff in. Will try and get it down next Wednesday and see what it can do!

Sent from my iPhone using Tapatalk

  • Like 1
Link to comment
Share on other sites

  • less WHY; more WOT
  • Site Developer
  • Member For: 16y 8m 16d
  • Gender: Male
  • Location: Melbourne

Shame you broke a driveshaft the last time out... updates to this thread are epic!

Haven't read it until today, but fark... what a beast! keep the information coming :spoton:

  • Like 1
Link to comment
Share on other sites

  • Donating Members
  • Member For: 13y 8m 16d
  • Gender: Male
  • Location: Perth

Thanks guys. Got these new Hoosier radials with the new tread and rubber. Managed to get it on gate before I left the line so I imagine around 20psi boost. No wonder the standard shaft broke. 87,000kms, 60k of which have been over 550rwhp.

Sent from my iPhone using Tapatalk

  • Like 1
Link to comment
Share on other sites

  • less WHY; more WOT
  • Site Developer
  • Member For: 16y 8m 16d
  • Gender: Male
  • Location: Melbourne

P.S turn off your Tapafark signature :spoton:

Open Tapatalk, go to the "Me" icon in the bottom-right corner, click on "Settings", click "Edit Signature", select "None". Done.

EDIT: not sure if this is the right instruction set as this is for Android, so iOS might be different :) 

Edited by k31th
Link to comment
Share on other sites

  • Manual mode ________________________ All day, erryday
  • Donating Members
  • Member For: 17y 1m 2d
  • Gender: Male
  • Location: Probably above atmospheric pressure
5 hours ago, MurdoK said:

Absolute beast of a car. Need a vid next time its down at the strip!

 

+1

 

 

Mounted near the gate hahaha.  Probably break the mic.

Link to comment
Share on other sites

  • Donating Members
  • Member For: 13y 8m 16d
  • Gender: Male
  • Location: Perth
13 hours ago, Lennox said:
20psi off the line how the hell does that hook up? Those Hoosiers must be damn good... what size?

 

Not sure how they would have held up down the track as it was the first run and the shaft broke as soon as I took off. They are 17inch 275s

 

11 hours ago, -Stever- said:
 

+1

 

 

Mounted near the gate hahaha.  Probably break the mic.

 

Haha I'll try and dig out the old Go Pro

Link to comment
Share on other sites

  • Donating Members
  • Member For: 13y 8m 16d
  • Gender: Male
  • Location: Perth

Took it down the drags the other night. Only got 1 pass until the track was shut due to rain. Was hard on the brakes at the end so I didn't get kicked out (if I knew it was going to be the only pass I would have gone all out) but on a good note I managed a 1.52 60ft time which was decent!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'