HI PSI Member 1,586 Member For: 18y 5m 28d Gender: Male Location: Central Queensland Posted 30/07/19 09:19 AM Author Share Posted 30/07/19 09:19 AM Pulled the box out today. We found this... Four of the remaining five bolts were loose. Luckily we had very little metal transfer from the crank to the flywheel. We filed the crank surface and machined the mounting face on the flywheel, just to ensure a flat clean surface. We did notice that there is only around 1.5 mm of tread left for flywheel clamp and we are a little concerned by this. We pondered the cause of the bolt failures and we surmise that the failures are as a result of the bolts high tensile grade having a negative impact on the shear strength of the bolts. We have doweled the crank and flywheel and are now considering a lower grade bolt. We are also considering drilling the crank for finer thread 7/16 bolts ... In closing, I'd just like to say thanks to Ozzy for his act of kindness, in loan of his dowel jig. You are awesome !! Some beers are coming your way... 1 1 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,985 Member For: 16y 7m 12d Gender: Male Location: Melbourne Posted 30/07/19 09:22 AM Share Posted 30/07/19 09:22 AM oh gee... this sucks... hopefully your solution works out. 1 Link to comment Share on other sites More sharing options...
HI PSI Member 1,586 Member For: 18y 5m 28d Gender: Male Location: Central Queensland Posted 30/07/19 09:58 AM Author Share Posted 30/07/19 09:58 AM Me too. I'm worried that I'll wear the thread out in the block if I keep this up.... It will be fun to drive it for a change. Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 26d Gender: Male Location: Perth Posted 31/07/19 04:27 AM Share Posted 31/07/19 04:27 AM Do you want to send the bolts to me and I will conduct a few tests and give my opinion. What torque setting did you use. 1 Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 22d Gender: Male Location: Adelaide Posted 31/07/19 06:55 AM Share Posted 31/07/19 06:55 AM On 15/07/2019 at 7:23 PM, HI PSI said: We were doing full power runs and the eddy brake would intermittently come on hard, sometimes stopping the engine dead. Even made the turbo spool backwards.... I have to say that this speaks volumes for the quality of Mal Woods tailshaft and The Driveline Shop Cv's... I took the car for a drive out to the worksop today and gave it a few squirts on the way. It now looks like I have again snapped some ARP flywheel bolts 21 hours ago, HI PSI said: Pulled the box out today. We found this... We pondered the cause of the bolt failures and we surmise that the failures were from the above statement......... QFT 1 Link to comment Share on other sites More sharing options...
Typhoon Member 564 Member For: 20y 1m 29d Gender: Male Posted 31/07/19 07:11 AM Share Posted 31/07/19 07:11 AM This build is inspiring mate! Will be one of the best in the country once sorted. 1 Link to comment Share on other sites More sharing options...
SIMBAD Donating Members 150 Member For: 12y 10m 11d Gender: Male Location: Tumut Posted 22/08/19 07:03 PM Share Posted 22/08/19 07:03 PM WHAT. A. BUILD. THREAD! 🙌🏼 Just finished reading it all and am left in awe! The detail you’ve put into the car and this thread is simply outstanding. Keen to see your finished product and a video of your beast leaving a set of 11s 😬 Inspiring stuff mate. 👌🏼👌🏼 1 Link to comment Share on other sites More sharing options...
HI PSI Member 1,586 Member For: 18y 5m 28d Gender: Male Location: Central Queensland Posted 25/08/19 11:22 PM Author Share Posted 25/08/19 11:22 PM Thank you for the kind words. I didn't think that anyone read or takes notice of my thread anymore. It's taken a it longer than I anticipayed, as I lost interest for quite some time and tge build ceased. I also have a tendency to finish and then upgrade or modify. It's pretty much where I want it to be now, all be it with some pending cosmetic and tuning changes. Updates coming soon. 4 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,985 Member For: 16y 7m 12d Gender: Male Location: Melbourne Posted 26/08/19 05:25 AM Share Posted 26/08/19 05:25 AM this thread Link to comment Share on other sites More sharing options...
pyrex New Member 2 Member For: 6y 10m 6d Gender: Male Location: Hobart Posted 26/08/19 08:14 AM Share Posted 26/08/19 08:14 AM 8 hours ago, HI PSI said: Thank you for the kind words. I didn't think that anyone read or takes notice of my thread anymore. It's taken a it longer than I anticipayed, as I lost interest for quite some time and tge build ceased. I also have a tendency to finish and then upgrade or modify. It's pretty much where I want it to be now, all be it with some pending cosmetic and tuning changes. Updates coming soon. Mate , I'm a forum lurker and love reading your build updates , your carbon fibre work is art.👍 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now