Skids4kids in the mid....not the bum like some Member 609 Member For: 11y 9m 14d Gender: Male Posted 30/07/15 12:25 AM Share Posted 30/07/15 12:25 AM (edited) I moved the line all the way to the body as possible and welded the fitting on then ran AN6 PTFE to the pump routing the line as needed as I have twin wastegates low mounted on my setup so Im with you on space. Edited 30/07/15 12:26 AM by Skids4kids Link to comment Share on other sites More sharing options...
HI PSI Member 1,586 Member For: 18y 8m 13d Gender: Male Location: Central Queensland Posted 31/07/15 07:05 AM Author Share Posted 31/07/15 07:05 AM (edited) Pic of fittings on the rocker cover. Edited 14/05/18 11:24 PM by k31th pb pics fix Link to comment Share on other sites More sharing options...
HI PSI Member 1,586 Member For: 18y 8m 13d Gender: Male Location: Central Queensland Posted 14/09/15 12:02 PM Author Share Posted 14/09/15 12:02 PM (edited) Haven't updated in some time, as I lost interest in posting. I mostly have the build completed and have been held up with the chroming of the rocker cover. Apparently it will be completed and shipped tomorrow. I've heard that before, so fingers crossed that it's true. Once it get's back, the hosing for the catch can will be completed and hopefully, first start up. In the meantime, I have been chipping away at the some of the cosmetic items. I had made a new air box for the car and started shaping the side wall to fit around the piping. I quickly realised that there wouldn't be much left and it quickly turned into two separate pieces. The chassis rail was drilled end riv-nuts installed. I the went to fit the lid and quickly realised that it wouldn't sit flush, as the filter sat too high. Not happy!!! I spent hours trying to find a work around. I looked at slotting and cutting around the filter,but they all looked like poo... So I came up with this.. Still in the prep stage of polishing...... As previously mentioned, we changed where the location rocker cover breathers. The standard locations have been blocked off. Due to this we have also modified the Nizpro garnish. Given the new location of the dump pipe, heat damage to hosing, and lines are a major concern. To address this, I have made a heat shield to cover the dump and fitted it up today. Please note that this is still in a raw finish and it will be cleaned , and new, nicer fasteners sought. Edited 14/05/18 11:26 PM by k31th pb pics fix 4 Link to comment Share on other sites More sharing options...
JVK Silver Donating Members 751 Member For: 19y 1m 20d Gender: Male Location: North West Hot Hell,VIC Posted 14/09/15 08:21 PM Share Posted 14/09/15 08:21 PM Looking good. The attention to detail in this build is remarkable and you dont mind thinking ( out of the square ) and bringing it to life.Wont be to long now by the looks and it will be done and running and you get to enjoy driving it. 1 Link to comment Share on other sites More sharing options...
HI PSI Member 1,586 Member For: 18y 8m 13d Gender: Male Location: Central Queensland Posted 15/09/15 08:34 AM Author Share Posted 15/09/15 08:34 AM (edited) Thank you for your kind words JVK. Unfortunately, I am not a rich man, but, I'm trying the best that I can, to ensure a quality finish throughout the project. Got a call today and the rocker cover chroming will be completed this week. :D So, not long now. Edited 15/09/15 08:35 AM by HI PSI 1 Link to comment Share on other sites More sharing options...
JVK Silver Donating Members 751 Member For: 19y 1m 20d Gender: Male Location: North West Hot Hell,VIC Posted 15/09/15 09:19 AM Share Posted 15/09/15 09:19 AM Lots of us are not rich and money cannot buy dedication and perseverance. Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 8m 12d Gender: Male Location: NOR Perth Posted 16/09/15 02:27 AM Share Posted 16/09/15 02:27 AM Unfortunately, I am not a rich man, but, I'm trying the best that I can, to ensure a quality finish throughout the project. Richer than some of us on here :( lol I could only dream of having half the goodies you've put into the car Can't wait to see the finished product and bet you can't wait even more Link to comment Share on other sites More sharing options...
HI PSI Member 1,586 Member For: 18y 8m 13d Gender: Male Location: Central Queensland Posted 17/09/15 08:43 AM Author Share Posted 17/09/15 08:43 AM (edited) Final install of the intake today. I rerouted a few hoses and installed the new main hose for the header tank. The catch can has also been connected to the intake. It looks a lot neater now. I need to source a few hose separators and a clamp cover for the header hose. Besides that, it's all good. As promised, here is a pic of the intake and shield in place. Unfortunately, I didn't have a clean soft cloth the clean all of the hand mark off the intake pipe, so be gentle. Edited 14/05/18 11:28 PM by k31th pb pics fix 6 Link to comment Share on other sites More sharing options...
HI PSI Member 1,586 Member For: 18y 8m 13d Gender: Male Location: Central Queensland Posted 01/10/15 09:22 AM Author Share Posted 01/10/15 09:22 AM (edited) After 10 weeks wait, the rocker cover is back..... I'm hoping for first start up within two weeks. Edited 14/05/18 11:29 PM by k31th pb pics fix 6 Link to comment Share on other sites More sharing options...
camo86T Silver Donating Members 1,810 Member For: 10y 11m 26d Gender: Male Location: SW Sydney Posted 01/10/15 11:08 AM Share Posted 01/10/15 11:08 AM Looks so mint they should make it a flavour bro 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now