shaunjennifer21 Member 95 Member For: 13y 8m 8d Posted 14/12/14 08:32 AM Share Posted 14/12/14 08:32 AM hi guys where is the best place to get a tailshaft centre bearing for an 04 xr6 turbo? I've seen them on eBay for $65 which comes with 12 months warranty. is there a nolathane style?? Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 11y 1m 10d Gender: Male Location: near brisbane Posted 14/12/14 07:28 PM Share Posted 14/12/14 07:28 PM Ralph Wiggum knows ,just send him a message . ps do not know if there are any nolathane ones Link to comment Share on other sites More sharing options...
Mr_4.0 Member 1,096 Member For: 14y 1m 19d Posted 14/12/14 10:40 PM Share Posted 14/12/14 10:40 PM If sedan.... Use genuine only!! Aftermarket are rubbish. Link to comment Share on other sites More sharing options...
shaunjennifer21 Member 95 Member For: 13y 8m 8d Posted 15/12/14 10:12 AM Author Share Posted 15/12/14 10:12 AM there rubbish why? Link to comment Share on other sites More sharing options...
Mr_4.0 Member 1,096 Member For: 14y 1m 19d Posted 16/12/14 10:28 AM Share Posted 16/12/14 10:28 AM Allignment, strength... Resulting in vibration... Failures... Link to comment Share on other sites More sharing options...
PhilMeUp Member 1,045 Member For: 16y 7m 21d Gender: Male Location: Perth, Western Australia Posted 18/12/14 09:16 PM Share Posted 18/12/14 09:16 PM (edited) Hardy Spicer:http://www.hardyspicer.com.au/driveline_products.asp Edited 18/12/14 09:18 PM by PhilMeUp 1 Link to comment Share on other sites More sharing options...
jas98 Member 1,046 Member For: 12y 7m 15d Gender: Male Location: Maryborough Qld Posted 19/12/14 03:11 PM Share Posted 19/12/14 03:11 PM Allignment, strength... Resulting in vibration... Failures...cant get genuine for a ba shaft though Link to comment Share on other sites More sharing options...
(Locky) Member 85 Member For: 11y 2m 7d Gender: Male Posted 21/12/14 06:52 AM Share Posted 21/12/14 06:52 AM My BF2 Ute just chewed mine out and car is now stranded at a mates place. Car is undrivable.Can this be swapped over at home with a semi decent setup ( rattle gun ect) sh*t timing as everywhere is about to close for xmas/new years 1 Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 11y 1m 10d Gender: Male Location: near brisbane Posted 21/12/14 08:32 AM Share Posted 21/12/14 08:32 AM yes I watched them do it while I got my shaft balanced .it did not look like it would be hard to do . Link to comment Share on other sites More sharing options...
PhilMeUp Member 1,045 Member For: 16y 7m 21d Gender: Male Location: Perth, Western Australia Posted 21/12/14 08:59 AM Share Posted 21/12/14 08:59 AM My BF2 Ute just chewed mine out and car is now stranded at a mates place. Car is undrivable.Can this be swapped over at home with a semi decent setup ( rattle gun ect) sh*t timing as everywhere is about to close for xmas/new yearsDid the job on my BA XR6T ute a few months ago.Getting the tail shaft out is easy enough if you can get the car up high enough to climb under safely.I had already bought the replacement bearing at Hardy Spicer. The bloke there said to be careful with dismantling it - not to let the balls fall out of the CV joint.At home, once I figured that I was getting to a point where I could stuff it up, I took the tail shaft, tools, new bearing, etc, back to Hardy Spicer to clarify what to do. Someone there explained it to me again and I swapped the bearing over in the carpark. Took the tail shaft back home and put it back in the ute.The utes use a CV joint (ie leaf spring back end) and the sedans use a universal joint. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now