fatgq New Member 22 Member For: 10y 3m 17d Posted 01/12/14 05:20 AM Share Posted 01/12/14 05:20 AM Hey boys been searching but can't seem to find what I am looking for. Will a 4 speed auto from e-a-b series cars bolt up to the fg turbo engine? Its going in a patrol swb and will be driven hard and raced, from what I have heard that will mince the 6 speed input shafts. Just looking for options that is all. The patrol auto is agricultural at best. Cheers boys. Link to comment Share on other sites More sharing options...
bamk2f6tornado Bronze Donating Members 777 Member For: 11y 3m 9d Gender: Male Location: Rockhampton Qld Posted 01/12/14 07:01 AM Share Posted 01/12/14 07:01 AM Either box will have to be fully built with strengthened input shafts anyway to handle racing with 400kw and 4wd.Think your better off with the built zf than built btr 4speed. About 4g ish to build the zf or just go built t400 or glide. Link to comment Share on other sites More sharing options...
fatgq New Member 22 Member For: 10y 3m 17d Posted 01/12/14 07:03 AM Author Share Posted 01/12/14 07:03 AM Yeah the drama is adaptor plates to transfer case. Which is the 4 spd TH box? Will still be a driver so need some fuel economy at 100 aswell. Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 11y 1m 12d Gender: Male Location: near brisbane Posted 01/12/14 07:03 AM Share Posted 01/12/14 07:03 AM turbo 400 would be the better way to go . Link to comment Share on other sites More sharing options...
fatgq New Member 22 Member For: 10y 3m 17d Posted 01/12/14 07:04 AM Author Share Posted 01/12/14 07:04 AM Ok marks do adaptors for transfer case but who does them from motor to box? Link to comment Share on other sites More sharing options...
bamk2f6tornado Bronze Donating Members 777 Member For: 11y 3m 9d Gender: Male Location: Rockhampton Qld Posted 01/12/14 07:10 AM Share Posted 01/12/14 07:10 AM 4 speed from a b series in btr. Might pay to wait for one of the more experienced blokes to chime in. Iv got a manual and gunna has nfi. Is this fatz fab? Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 11y 1m 12d Gender: Male Location: near brisbane Posted 01/12/14 07:11 AM Share Posted 01/12/14 07:11 AM there was a guy on this forum ,that just did a conversion . try to find it for you .you can then message him for info Link to comment Share on other sites More sharing options...
fatgq New Member 22 Member For: 10y 3m 17d Posted 01/12/14 07:11 AM Author Share Posted 01/12/14 07:11 AM Nah mate not fatty. He has built my cooler and rollcage though haha. Link to comment Share on other sites More sharing options...
fatgq New Member 22 Member For: 10y 3m 17d Posted 01/12/14 07:12 AM Author Share Posted 01/12/14 07:12 AM Cheers Link to comment Share on other sites More sharing options...
bamk2f6tornado Bronze Donating Members 777 Member For: 11y 3m 9d Gender: Male Location: Rockhampton Qld Posted 01/12/14 07:15 AM Share Posted 01/12/14 07:15 AM Small world haha I work at the gas place over the road from fatz. Could try calling a few very experienced places that specialise xr6t as they have probably done sh*t like this before. Would try xtreme Ford tuning and Crescent motor sport. They might be able to point you in the right direction. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now