Fg Intake Muffler Delete

[GUN-808]

Yep I made my own..

I have a 4" inlet into turbo so have a 4" silicone 90deg bend -- $25 ebay..

Mated to a 90deg mild steel bend which I careful cut to size and desired length.. -- $40

Had it wrinkle black Powder Coated -- $30 and add a few clamps -- $5

Mates up to the original rubber coupler to the crossover..

So all up about $100 and does as good as any kit on the market..

[stretch4660]

Also made my own up the other day

3 inch turbo inlet so I used a 4inch to 3 inch silicone reducer, trimmed about an inch off the 4inch opening end to gain desired length

Cut aluminium 90 degree mandrel bent pipe to length to gain correct fitment height in relation to the 4 inch pipe across the top of the engine

Then used a 3 inch 90 degree bend silicone hose onto the turbo, had to trim about an inch off the turbo end so it wasn't rubbing on the back of the power steering reservoir

Then 4 hose clamps to secure everything together 3x3 inch 1x4 inch

All up cost $112, all parts bought off the shelf at Autobarn

[10SECN]

put your own brand and sell em 150 on ebay lol ... still cheaper than everything else on the market

[PTR_NITRO_FG]

^^^some dudes already doing that lol

Awesome choices of red, black or blue silicone joiners

[Bizkets is Drunk?]

if you could find a company in china that could fab it up for you. you could probably do it for $25 easy.

[Lennox]

Yeh if u ordered 10,000 maybe.. U think a companies gonna fab up 5 pipes a year for ya..

[Bizkets is Drunk?]

its only a pipe. get the angle and size. find a company that do pipes and try. it will be fark all.

[stretch4660]

90 degree bend, 3 inch ID, any exhaust shop with a mandrel bend machine could pump out hundreds in no time for you