rednose RNS10S Donating Members 2,229 Member For: 18y 2m 23d Gender: Male Posted 23/10/14 05:48 AM Share Posted 23/10/14 05:48 AM Let us know how it goes Link to comment Share on other sites More sharing options...
MattyP MattyP Cruise Control 6,317 Member For: 12y 6m 4d Gender: Male Location: Central Coast Posted 23/10/14 05:50 AM Share Posted 23/10/14 05:50 AM Will do Link to comment Share on other sites More sharing options...
Peppy_t92 Silver Donating Members 748 Member For: 11y 7m 6d Gender: Male Location: Liverpool Posted 23/10/14 07:10 AM Share Posted 23/10/14 07:10 AM I was doing 130mph using KPM's twin 300's... 0.82 lambda with very conservative timing and no traction until 3rdNow I have the twin 460's and a built motor and box on the way, to try and max out the gtx3582... Plus supporting mods to try and get it down the track... I'll be happy to put KPM's new e85 pumps in to see how far they can be pushed? 1 Link to comment Share on other sites More sharing options...
demon1300 Member 435 Member For: 12y 8m 30d Gender: Male Posted 23/10/14 10:06 AM Share Posted 23/10/14 10:06 AM Didn't KPM also do some testing with their swirl pots in a production series ute around mallalla? Only had 5lts in the tank and monitored flow and pressure. They thrashed it around until it basically ran out of fuel. Results were that the pressure and flow didn't budge at all until it just plain ran out. Not banging the KPM drum at all, but I think the data speaks for itself. Surges are redundant compared to a properly engineered intank system. 2 Link to comment Share on other sites More sharing options...
rollex Member 683 Member For: 10y 5m Gender: Male Location: Australia Posted 23/10/14 10:57 AM Author Share Posted 23/10/14 10:57 AM (edited) Didn't KPM also do some testing with their swirl pots in a production series ute around mallalla? Only had 5lts in the tank and monitored flow and pressure. They thrashed it around until it basically ran out of fuel. Results were that the pressure and flow didn't budge at all until it just plain ran out.Not banging the KPM drum at all, but I think the data speaks for itself. Surges are redundant compared to a properly engineered intank system.I would like to see this data as if true that is a pretty good sales pitch.What is the KPM intake solution and how much is it? Edited 23/10/14 11:00 AM by rollex 1 Link to comment Share on other sites More sharing options...
Peppy_t92 Silver Donating Members 748 Member For: 11y 7m 6d Gender: Male Location: Liverpool Posted 23/10/14 11:47 AM Share Posted 23/10/14 11:47 AM I ran my car around wakefield park with 10L e85 as an experiment when I first got my twin pump setup. I done 7 laps, zero surge, with fuel to spare.I retrofitted the fg tank into my car to fit KPM's fuel module and for 2 weeks I didn't have a fuel sender, I completely ran out of e85 twice, both times not even knowing I was near empty and no surge with plenty of spirited driving leading up to itBut I'm sure David has some clear data he can share, as well as the tests they carried out regarding fuel temps and their effects?? Link to comment Share on other sites More sharing options...
"Captain Retard" Member 1,417 Member For: 10y 6m 6d Gender: Male Location: Shellharbour NSW Posted 23/10/14 10:32 PM Share Posted 23/10/14 10:32 PM Just read this thread and its a great read especially when the tuners get involved.There's just one thing that's slightly irritating me, these are ANTI-surge tanks we are talking about?Another thing as regards the 20sec at wot or 1000m runs, I would have thought that as speed increases ,acceleration decreases and therefore G-force so the fuel should come back too the pick-up or are these tanks that bad?Just an observation , don't mean to nit-pic! Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 8d Gender: Male Location: Adelaide Posted 23/10/14 10:48 PM Share Posted 23/10/14 10:48 PM Yeh the BA tank is terrible and even hooking around the streets in summer u notice it ( surge ) Some are banging on about seconds at WOT that's fine the first time, how bout the refresh rate ... U can empty the intank swirl pot fairly quickly but how fast does it re fill ? This is a killer when u start scooting around streets etc the swirl pot has a hard time refreshing where as if u use the intank to feed a surge ( 1.7-2ltrs ) u effectively have enough fuel to empty the swirl pot AND surge in the same time a intank just emptys, No doubt intanks will be a good alternative now and in the future but my money is still on the "house" because its done its time and a proven winner especially when u go to the effort of speed controllers on big pumps attached to external tanks.I see it as having two safety measures in place of just one 2 Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 5m 12d Gender: Male Location: @ my laptop Posted 23/10/14 11:39 PM Share Posted 23/10/14 11:39 PM I ran my car around wakefield park with 10L e85 as an experiment when I first got my twin pump setup. I done 7 laps, zero surge, with fuel to spare.I retrofitted the fg tank into my car to fit KPM's fuel module and for 2 weeks I didn't have a fuel sender, I completely ran out of e85 twice, both times not even knowing I was near empty and no surge with plenty of spirited driving leading up to itBut I'm sure David has some clear data he can share, as well as the tests they carried out regarding fuel temps and their effects??Good to see some independent results 1 Link to comment Share on other sites More sharing options...
KPM Motorsport Member 968 Member For: 19y 17d Gender: Male Location: 2 Dunorlan Road Edwardstown S.A. 08 82999998 Posted 23/10/14 11:41 PM Share Posted 23/10/14 11:41 PM (edited) Just read this thread and its a great read especially when the tuners get involved.There's just one thing that's slightly irritating me, these are ANTI-surge tanks we are talking about?Another thing as regards the 20sec at wot or 1000m runs, I would have thought that as speed increases ,acceleration decreases and therefore G-force so the fuel should come back too the pick-up or are these tanks that bad?Just an observation , don't mean to nit-pic!Correct. It takes approxamitely 11-13 secs to drain an intank system with NO fuel in the tank.If you have even as little as 5-10 liters in the tank your properly engineered intank system will both refill from the return as well as scavenge by the venturi system more than enough fuel to keep the swirl pot full.This is part of the field tetsting that we have done around tight circuits and on street Edited 23/10/14 11:42 PM by KPM Motorsport Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now