MattyP MattyP Cruise Control 6,317 Member For: 12y 7m 10d Gender: Male Location: Central Coast Posted 15/10/14 07:53 AM Share Posted 15/10/14 07:53 AM Don't the zfs like a bit of warmth Link to comment Share on other sites More sharing options...
barnz Member 3,047 Member For: 11y 24d Gender: Male Location: Brisbane Posted 15/10/14 09:24 AM Share Posted 15/10/14 09:24 AM (edited) They do but they also don't like over heating either, if you flog it hard like track work or towing I think a cooler is a good idea. Also the heat exchanger is really for cold conditions and starts isn't it? That setup will see the box around ect temps anyway, start giving it a really hard time and temps will get high.It does say somewhere in the zf service procedure the box must get to 70 degrees, its not the fluid level check, maybe on the test drive? So I guess they like being atleast that temp. Will try and find that bit of info... Edited 15/10/14 09:30 AM by barnz Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 6m 17d Gender: Male Location: @ my laptop Posted 15/10/14 09:54 AM Share Posted 15/10/14 09:54 AM they also require correct oil flow, many of the air to oil coolers are too small and restrict flow Link to comment Share on other sites More sharing options...
Bizkets is Drunk? Too heavy needs boost Member 5,929 Member For: 11y 4m 9d Gender: Male Location: Adelaide Posted 15/10/14 09:58 AM Share Posted 15/10/14 09:58 AM have never had a issue. Link to comment Share on other sites More sharing options...
MattyP MattyP Cruise Control 6,317 Member For: 12y 7m 10d Gender: Male Location: Central Coast Posted 15/10/14 10:13 AM Share Posted 15/10/14 10:13 AM What's your thoughts then mick of running an air to air then the pwr? Or does the pwr handle the abuse we throw at it? Link to comment Share on other sites More sharing options...
Bizkets is Drunk? Too heavy needs boost Member 5,929 Member For: 11y 4m 9d Gender: Male Location: Adelaide Posted 15/10/14 10:22 AM Share Posted 15/10/14 10:22 AM mine is a pwr Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 6m 17d Gender: Male Location: @ my laptop Posted 15/10/14 10:32 AM Share Posted 15/10/14 10:32 AM I went the PWR ZF heat exchanger on Bels car, but we don't do track work with it, but I have a customer that does track work and has no issues with the PWR on his car 1 Link to comment Share on other sites More sharing options...
MattyP MattyP Cruise Control 6,317 Member For: 12y 7m 10d Gender: Male Location: Central Coast Posted 15/10/14 10:36 AM Share Posted 15/10/14 10:36 AM I know biz but I meant the heat exchanger Proper cooling for me is essential (hence going to jons IC) so I just want to make sure that unit is up for it. Thanks for that mickAnd if it isn't Has anyone run both? (Air to air into a heat exchanger) Link to comment Share on other sites More sharing options...
bjc Donating Members 2,823 Member For: 21y 3m 11d Gender: Male Location: Townsville Posted 16/10/14 01:38 AM Share Posted 16/10/14 01:38 AM I used a B&M Supercooler on my BA Turbs which was in the same position as Biz's and it was on there for years without a fan and no problems with the 4sp auto still hitting hard after 7yrs or so.From what I witnessed though the oil in the 4sp does only flow through at a low-ish speed so unless the ZF squirts out at high pressure I can't see a problem but that is why I have those two dicky OBD2 gauges to monitor the temps of everything... 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now