"Captain Retard" Member 1,417 Member For: 10y 7m 12d Gender: Male Location: Shellharbour NSW Posted 08/10/14 09:22 PM Author Share Posted 08/10/14 09:22 PM 97,000 with original exchanger. just had tranny serviced with new exchanger What do they hit you for a new exchanger? Link to comment Share on other sites More sharing options...
xr6tForMe Donating Members 268 Member For: 11y 5m 15d Gender: Male Posted 08/10/14 09:32 PM Share Posted 08/10/14 09:32 PM Because the Barra is known to have harmonics due to its 10 foot long crankshaft (give or take a foot or three) and long stroke, if the 'cells' are not sweated together perfectly the transmitted vibration from the engine causes an internal rupture..If the problem involves vibrations from the engine, would a different mounting system (to isolate the vibrations) be a good idea for those with the standard cooler? Link to comment Share on other sites More sharing options...
xr6tnv PC LOAD LETTER Donating Members 388 Member For: 13y 1m 27d Gender: Male Location: Melbourne Posted 08/10/14 11:43 PM Share Posted 08/10/14 11:43 PM Replaced mine with another new stock unit at 101,000km... Not sure if the unit taken off had been replaced before but didn't look too bad on the outside. Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 6m 17d Gender: Male Location: @ my laptop Posted 08/10/14 11:52 PM Share Posted 08/10/14 11:52 PM according to my local dealer, there are 4 different heat exchangers and vary in price from just under $200 to high $200 1 Link to comment Share on other sites More sharing options...
burkey05 Member 76 Member For: 10y 7m 27d Gender: Male Location: Melbourne Posted 09/10/14 10:05 AM Share Posted 09/10/14 10:05 AM What do they hit you for a new exchanger?all up tranny service with LG6 oil, exchanger and fixing a little oil leak was $1050.not sure exactly how much the exchanger was Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 6m 17d Gender: Male Location: @ my laptop Posted 09/10/14 10:17 AM Share Posted 09/10/14 10:17 AM depending on exchanger price but we could have done that for possibly less than $800 assuming the oil leak was from the wiring sleeve Link to comment Share on other sites More sharing options...
RynoF6 Idiot Member Donating Members 446 Member For: 14y 10m 23d Gender: Male Location: Muswellbrook, NSW Posted 09/10/14 10:20 AM Share Posted 09/10/14 10:20 AM My Original one did 120,000kms and it started leaking on the outside only, few drops of coolant on the garage floor I found. Replaced with new factory item. Has less than 5,000 on new one. 1 Link to comment Share on other sites More sharing options...
burkey05 Member 76 Member For: 10y 7m 27d Gender: Male Location: Melbourne Posted 09/10/14 11:18 AM Share Posted 09/10/14 11:18 AM depending on exchanger price but we could have done that for possibly less than $800 assuming the oil leak was from the wiring sleeveunfortunately ratter your in frankston, I'm in the northern suburbs.and it was timing cover that was leaking Link to comment Share on other sites More sharing options...
MattyP MattyP Cruise Control 6,317 Member For: 12y 7m 10d Gender: Male Location: Central Coast Posted 09/10/14 11:29 AM Share Posted 09/10/14 11:29 AM If it wasn't for cms I'd be going to Frankston from nsw lol 1 Link to comment Share on other sites More sharing options...
turbotrana Member 2,586 Member For: 21y 8m 14d Gender: Male Posted 09/10/14 11:33 AM Share Posted 09/10/14 11:33 AM (edited) I changed mine when the FG was 3yrs old and now 2yrs later gonna change again.We have two E39 5 series BMWs and both run a similar setup but don't really hear about the BMW coolers failing. Maybe cause they are made in Germany I would think.Nevertheless came across these. Are they made any better??http://www.motospecs.com.au/assets/files/downloads/Heat_Exchangers.pdf Edited 09/10/14 11:34 AM by turbotrana Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now