ratter Member 6,793 Member For: 18y 10m 8d Gender: Male Location: @ my laptop Posted 05/10/14 11:37 AM Share Posted 05/10/14 11:37 AM clutch pack clearances are critical to correct shifting, even a different brand of clutch plate can alter this, different shims and thickness steels are available also but one does not just stick a new clutch pack in without doing all the tolerance checks 1 Link to comment Share on other sites More sharing options...
FiftyOne Bronze Donating Members 1,145 Member For: 11y 9m 3d Gender: Male Posted 05/10/14 11:45 AM Share Posted 05/10/14 11:45 AM well put sir Link to comment Share on other sites More sharing options...
Scase500 New Member 2 Member For: 13y 6m 12d Gender: Male Posted 06/10/14 11:04 AM Share Posted 06/10/14 11:04 AM 07 bf, 170k on clock with 380rwkw for last 6yrs 2 of those yrs with zf tune and still stock heat exchanger and box. Only problem I've had was leaking electrical connector on box. Finally starting to slip so time for rebuild and will get a pwr heat exchanger when fresh box goes in. 2 Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 4m 11d Gender: Male Location: Probably above atmospheric pressure Posted 06/10/14 01:06 PM Share Posted 06/10/14 01:06 PM That's a good innings! Link to comment Share on other sites More sharing options...
bjc Donating Members 2,823 Member For: 21y 7m 1d Gender: Male Location: Townsville Posted 07/10/14 12:01 AM Share Posted 07/10/14 12:01 AM If you've ever pulled a watch apart (analogue) and thought fmd where did that spring go then that's how most people would feel about an automatic gearbox! A fcking nightmare...Especially if you are doing it on carpet...Haha Link to comment Share on other sites More sharing options...
SuckSqueezeBangBlow ʎǝʞuoɯ ɹoıuǝs Donating Members 1,808 Member For: 16y 3m 19d Gender: Male Posted 07/10/14 09:26 AM Share Posted 07/10/14 09:26 AM 89,000km. I've changed the heat exchanger at 30k and 70k. I won't do it again, if it goes I'll deal with the consequences or trade in the car (just quietly) Link to comment Share on other sites More sharing options...
FiftyOne Bronze Donating Members 1,145 Member For: 11y 9m 3d Gender: Male Posted 07/10/14 09:34 AM Share Posted 07/10/14 09:34 AM But isn't that one of the ideas of the 6hp series? that it's not overly complex to build?http://www.rangerovers.net/forum/6-range-rover-mark-iii-l322/44034-zf-6hp26-teardown.html Link to comment Share on other sites More sharing options...
MattyP MattyP Cruise Control 6,317 Member For: 12y 11m Gender: Male Location: Central Coast Posted 07/10/14 11:01 AM Share Posted 07/10/14 11:01 AM I've read that before That is way out of my league Link to comment Share on other sites More sharing options...
burkey05 Member 76 Member For: 10y 11m 18d Gender: Male Location: Melbourne Posted 08/10/14 03:50 AM Share Posted 08/10/14 03:50 AM 97,000 with original exchanger. just had tranny serviced with new exchanger Link to comment Share on other sites More sharing options...
xr6tForMe Donating Members 274 Member For: 11y 9m 6d Gender: Male Posted 08/10/14 11:19 AM Share Posted 08/10/14 11:19 AM Mk1 G6ET.First and only mod I did was bypass the stock heat exchanger and fit a cooler at the front of the car -along with flush of gearbox oil. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now