bjc Donating Members 2,823 Member For: 21y 3m 12d Gender: Male Location: Townsville Posted 30/09/14 01:57 AM Share Posted 30/09/14 01:57 AM Any chance you can log intake temps from just after the IC for a track day then change to a bar and plate and register them again?This would give the best indication of what is better suited for everyday use IMO as they both have plus and minuses but would be interesting to see it in a real world hard test enviroment...On a different note, I get the feeling you just want to change the IC Nelson for "just a change" rather then the fact that you need to as you don't have heat or power problems? Link to comment Share on other sites More sharing options...
Seaton Donating Members 537 Member For: 12y 3m 19d Gender: Male Location: Sydney Posted 30/09/14 06:19 AM Share Posted 30/09/14 06:19 AM Plazmaman stuff is tube and fin, and you do seem to see lots of Plaz stuff on race cars. Maybe because they do custom stuff. Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 19d Gender: Male Location: Perth Posted 30/09/14 06:48 AM Share Posted 30/09/14 06:48 AM Just cut the front of the car to bits and cram in the largest one there is Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 6m 15d Gender: Male Location: Adelaide Posted 30/09/14 06:55 AM Share Posted 30/09/14 06:55 AM ^^^ this ^^^Srs Link to comment Share on other sites More sharing options...
nelsonian101 Donating Members 961 Member For: 16y 5m 21d Gender: Male Location: Sydney Posted 30/09/14 09:11 AM Author Share Posted 30/09/14 09:11 AM Plazmaman stuff is tube and fin, and you do seem to see lots of Plaz stuff on race cars. Maybe because they do custom stuff.The low weight of the Plazmaman tube and fin coolers now have me interested. Link to comment Share on other sites More sharing options...
nelsonian101 Donating Members 961 Member For: 16y 5m 21d Gender: Male Location: Sydney Posted 30/09/14 09:21 AM Author Share Posted 30/09/14 09:21 AM ,Just cut the front of the car to bits and cram in the largest one there isI wish it was that simple. The biggest coolers are great for drag passes, max power for short duration/low heat soak/ lowering intake temps, but don't allow any airflow through the radiator. I know of at least one big HP supra circuit car that started with a massive front mounted intercooler that actually went quicker by cutting the top off the cooler to help with airflow through the radiator to get cooler temps and hence engine temps down. Link to comment Share on other sites More sharing options...
nelsonian101 Donating Members 961 Member For: 16y 5m 21d Gender: Male Location: Sydney Posted 30/09/14 09:26 AM Author Share Posted 30/09/14 09:26 AM Any chance you can log intake temps from just after the IC for a track day then change to a bar and plate and register them again?This would give the best indication of what is better suited for everyday use IMO as they both have plus and minuses but would be interesting to see it in a real world hard test enviroment...On a different note, I get the feeling you just want to change the IC Nelson for "just a change" rather then the fact that you need to as you don't have heat or power problems?It's very difficult to data log accurately if the testing is done of different days, as would be the case for me. The plan is to use the existing busted PWR cooler at Wakefield on October 11th and then later in the month replace it with a Process West stage 2 or Plazmaman 1000hp.One more question. As a quick dodgey fix if required, I was recommended some 5min Araldite glue to seal any of these potential intercooler cracks in the pits on the day if it gets worse. Any other ideas? Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 19d Gender: Male Location: Perth Posted 30/09/14 11:05 AM Share Posted 30/09/14 11:05 AM 2 Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 19d Gender: Male Location: Perth Posted 30/09/14 11:08 AM Share Posted 30/09/14 11:08 AM Will you be running over 20, 000 PSI boost. If so this repair wont work 1 Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 23d Gender: Male Location: Perth Posted 30/09/14 11:44 AM Share Posted 30/09/14 11:44 AM I watched a boily carry out a similar repair on a Liebherr 996 Excavator Hyd Oil coolder back in the day. He said he was going to solder the ally core closed. We almost sent him for a drug test.Turns out he was right! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now